Turbo it lor just like taiwanese always do..hehe..
Heard that nowdayz 2nd hand civic turbo kit from taiwan comes in malaysia but dun know where to get it..maybe ur side there got??
Try to source it around..Good Luck..
depend on what boost ure targetting on, if juz low boost application not more than 0.5 bar,stock internal is ok,juz add thicker metal gasket,bigger injector and safc.that will do without any prob.roughly mods should be around 7k.but if ure targetting higher boost and want tha car run like turbo car,then hmmm..20k also not enough la.bcos engine management is the crutial part here that will cost u the bomb!
Yup..this is what I wanna to mention just now..
The turbo kit just boost at 0.4 - 0.5 bar only..hehe..
Coming down from Taiwan, if not mistaken just 6k to 7k including installation..
i.6 sohc???port n polishing,full exhaust system+extractor,air filter
fuel regulator,bigger throttle body n high cam,lightened f/wheel
l/w crank pulley,thinner head gasket,good plugs new piston ring.
that should do it.hehehehehe.........
Hi all, my car is due for a timing belt change. Beside changing the belt, water pump and bearing etc, what else do I need to replace for this major servicing? Appreciate if can provide the part no. too. haha. Mileage...
To all sifus, i need ur kindly suggestions, info, knowledge here pls.
Currently im using standard evo2 engine but my piston has crack n damaged the piston hole...so my foreman said has to be rebore.
Im planning to...
Hello everybody..im planning to change my standard TD05 to Garrett AR50 56mm turbine wheel, i got it oredy from a friends. recently i test it before the turbine been taken out and from what i feel..the turbine come...