looking for s-flow exhaust for altezza

[mokh]

hi all..

im looking for a s-flow exhaust to replace my currently dont-know-type exhaust coz cant stand the noise.

my budget around 250-300..used should me ok.

please advise.

 

[wfhan]

if jacked up your car to peep underneath at the muffler,
any embossed brand/name ?


u got pm

 

[mokh]

if jacked up your car to peep underneath at the muffler,
any embossed brand/name ?


u got pm

yes..got a hong-kong characters embossed..do no what it means.

 

[wfhan]

snap a pic let us see ....:)

 

[green]

most probably kakimotor.

cheapest alternative. get a local made fibreglass bullet(this one will absorb exhaust/engine frequencies which makes the loud bassy noises) and install in the middle section of your exhaust system.

cost u maybe rm200-300. can buy from any exhaust shop

cheapest mah....

 

[350_GT]

 

[mokh]

i just changed the mufler..with local made one. the noise reduced, the performance so so la..

 

[Bl@cK-TeZZ@]

If ur looking for a S-flow exhaust made in Japan...u better up ur budget if not it will be like 'Tin Kosong' exhaust.

 

[wfhan]

let us know after 1 week or 1 month of usage how it feels ?

 

[Greytezza]

My feeling will be loss of power and might even affect yr petrol consumption.....My experience is I had fixed a header fabricated locally b4 and the consequences was really bad. Loss of torque, power and very very bad consumption. Had to removed it after a week....

 

[doritezza]

most probably kakimotor.

cheapest alternative. get a local made fibreglass bullet(this one will absorb exhaust/engine frequencies which makes the loud bassy noises) and install in the middle section of your exhaust system.

cost u maybe rm200-300. can buy from any exhaust shop

cheapest mah....

Mr green, do u have a picture of this Fibeglass bullet? did u mean take-out the burnt fibre in the current one and replace it with this thing :rolleyes: ?

thanks.

 

[green]

Mr green, do u have a picture of this Fibeglass bullet? did u mean take-out the burnt fibre in the current one and replace it with this thing :rolleyes: ?

thanks.

u can get this fibreglass bullet anywhr from any exhaust shop. Our oem centre pipe has 2 of this small bullets. they are filled with a type of fibreglass. This is to absorb the engine's annoying frequencies that generate loud/bassy noises. Of course local made ones are so-so quality only but can last u maybe few years but the are cheaper.

I mean u must replace the entire bullet, means u will have to cut n weld the new local made bullet onto ur centre pipe. take out the old one...

shouldnt be a problem

 

[wfhan]

u can get this fibreglass bullet anywhr from any exhaust shop. Our oem centre pipe has 2 of this small bullets. they are filled with a type of fibreglass. This is to absorb the engine's annoying frequencies that generate loud/bassy noises. Of course local made ones are so-so quality only but can last u maybe few years but the are cheaper.

I mean u must replace the entire bullet, means u will have to cut n weld the new local made bullet onto ur centre pipe. take out the old one...

shouldnt be a problem

anyone re-fibre their mid muffler and tail muffler b4 ?
is it just as simple as cut open, re-insert & weld back ?
will the performance be same ?

 

[Bl@cK-TeZZ@]

anyone re-fibre their mid muffler and tail muffler b4 ?
is it just as simple as cut open, re-insert & weld back ?
will the performance be same ?

Bro, u go do 1st then u can tell us how is it done...give us some feedback after tat.

 

[wfhan]

Bro, u go do 1st then u can tell us how is it done...give us some feedback after tat.

ah..... so this means noone here did it lor.. hehe..
i DIY!...

 

[Greytezza]

i DIY!...

Hey Mike...that is taikor BlackTezza's trademark sign lah...U must ask permission to use it...

 

[wfhan]

Hey Mike...that is taikor BlackTezza's trademark sign lah...U must ask permission to use it...

well, i'll take over his DIY throne!!..
already got my first DIY proj in my mind...

 

[aycy]

wfhan. yeah u DIY d let us know the result...

 

[wfhan]

wfhan. yeah u DIY d let us know the result...

for the exhaust i won't DIY la..
Maybe will try DIY replacing the stock SatNav with Garmin's, using back the
stock SatNav housing and motorize cover & tilt... :)

 

[1JZtezza]

Adoooi mak!!!!Many moons ago you were saying the same thing about the satnav and garmin!!!

At this rate poor Mokh got to wait years for his s-flow muffler???