mivec turbo project

[jtdw]

hi, to all sifus, i would like to convert my wira aeroback to mivec turbo. Mivec head +gsr block + microtech ecu + tdo5 twin fin. If any sifu out there that currently successfully convert this project, mind to give me some comment regarding reliability and performance. pls comment thx..........

 

[gtishadowfax]

mivec turbo = evo IX!!

a friend of mine tried this project a couple of years ago, but it was not accomplished ...if i'm not mistaken the major problem is to re-write the chip, to make turbo and mivec work/spool/open simultaneously and to get proper torque level at different gears...

the main objective/achievement of mivec turbo as in evo ix is u'll have a very powerful torque at any gear, so the car doesnt feel sluggish/almost eliminates the lag caused by turbo spool...

do correct me if i'm wrong. bro, if its successful, pls post and share with us...

 

[putra4767]

many a times discussed oledy bro....

It will work provded done completely wit all stuff...

 

[Cohiba]

Mivec turbo is all about having loads of $$$$$$$$$$$$$$$$$ :regular_smile:

the best is to include pistons,conrods,etc...the whole works..and the only thing that ive noticed that gives way once u have high hp/torque is youre crankshaft...

but if u have the cash,go for it i.m.o ......really good IF tuned rite....

keep us updated on your project ......good luck:regular_smile:

 

[jtdw]

will go on with this project

hey, i am going on this project very soon after gather all the necessary parts that need for the transplant! will come back soon thank for commenting!

 

[jtdw]

will go on with this project

hey, i am going on this project very soon after gather all the necessary parts that need for the transplant! will come back soon thank for commenting!

 

[beyond_4896]

jb hv racing have do a car now.
Boost 1.5max boost, with t04e. microtech.

damn damn fast!!!!!

 

[boyzone]

mivec head with GSR block ?? how about piston ? what's compressor ratio??

 

[jtdw]

how fast

beyond, how fast are consider fast? hp? torque? can beat evo 3? or evo 9? pls discuss more thx you

 

[equin0x]

i was thinking also whether this can be done to 6A12 or not. FTO's 6A12 is equipped with MIVEC but then Galant's 6A12 is turbocharged. basically from the technical spec sheet of this both engine, bore and stroke of the engine is of the same except the compression ratio (NA 10.0:1 and forced feed one is 8.5:1). if given the MIVEC head will fit perfectly on the turbocharged block, how do one measure for a suitable compression ratio for this hybrid project? put the tuning for the powerband aside as it is of diff case.

 

[GSR06]

Better get an original Evo Engine. Less headache and original is better than rojak.

 

[Cohiba]

its common to see 350-450hp mivec turbos around...

but the question is if its reliable or not....in the long run sure got probs if not tuned rite...

 

[boyzone]

just prepare to stay inside workshop more than u drive out on the road. :)

 

[Cohiba]

Might be doing this as well...sigh...still contemplating though....

350-400 whp cukup laa kot :X-:

 

[Danny@GSR]

Bro, keep us inform. MALAYSIA BOLEH KA TAK BOLEH???????????
mesti boleh cause in Penang i know there is one Mivec Turbo runing on the road, but i never seen it.

 

[nakamichi]

Proper ECU configuration needed... especially when TD-05 kicks in then Mivec is activated....

ignition timing and extra fuel...........

yummy.......

Cheers

 

[akmar ismail]

how about mive waja trbo,how much does it cost?

 

[nakamichi]

akmar ismail:
there is this member waja4646 selling his turbo kit including e-manage at Bolt-On thread.... u can check it out there... currently the turbo kit is in his protonwaja.

Cheers

 

[jaydee]

Shouldn't be a problem... One of my car team member running on this. Mivec head with GSR block, with tdo5. Using shift lamp to control Mivec. Tuned by our usual mech, Pro Drag.. I don't think there is any super tuning involved. So far no problems with engine... :)