mod in 1.6 soch..ned HELP!!!

[DanzEterna]

if for sohc should be no problem...

 

[watrul3s]

y say so?? then if for doch might hv problem?

 

[Veloc]

I think maybe becoz DOHC need to adjust both camshafts together. SO more difficult...

And Danz... Haha... I don't know about the Jasma. They write Jasma. But actualyl does jasma really manufacture camshaft? Japan Automotive Sports Muffler Association. They do camshafts? And even if got, RM 500 only??? That's why I think maybe ayam brand. Don't know lah... Not expert in camshaft... But even if cap ayam precision machined camshaft should be important right i guess?

Best if get to know whether got warranty or not and visit the premise...

---------- Post added at 05:42 PM ---------- 6 hour anti-bump limit - Previous post was at 05:42 PM ----------

I think maybe becoz DOHC need to adjust both camshafts together. SO more difficult...

And Danz... Haha... I don't know about the Jasma. They write Jasma. But actualyl does jasma really manufacture camshaft? Japan Automotive Sports Muffler Association. They do camshafts? And even if got, RM 500 only??? That's why I think maybe ayam brand. Don't know lah... Not expert in camshaft... But even if cap ayam precision machined camshaft should be important right i guess?

Best if get to know whether got warranty or not and visit the premise...

 

[DanzEterna]

nola, jasma is considered slightly higher than ciken brand.

 

[watrul3s]

oo..how abt works cam?

 

[Veloc]

nola, jasma is considered slightly higher than ciken brand.

No Danz... What I meant was... I was asking... Does Jasma really produce camchaft? And, even if they do, is RM500 the appropriate price or is it too cheap?

 

[DanzEterna]

jasma is something like our SIRIM la, but they just regulate exhaust......
for this jasma camshafts, radiators, pulleys are made in china i think or malaysia but definately not from japan......

for camshafts rm500 is considered cheap but dunno how reliable it is...compared to works engineering....

yesterday i installed jasma aluminium radiator for my bro in law's car...i tot it was plug n play as stated on the box.....ended up modifying the brackets...too 3 hrs to do it....damnit....summore if u look at the welding spots..done so cincai..... i think i could weld better hehe

 

[Veloc]

Whoa Danz! Hebat la you... Can modify stuff again...

I mean that's what I'm saying. Because Jasma is like an acreditation body for sports mufflers. They are not a brand and do not manufacture stuff like camshaft. Could the camshaft possibly be a tiruan thing?

 

[DanzEterna]

stakat pasang the radiator can la...for wira 1.3 quite simple.....
suppose to knock the bottom radiator brackets...but its damn blardy hard....so decided to
cut the lower & upper mounting bushes.......then use a bracket to screw the condesor fan cos jasma rad are double layer.......

---------- Post added at 08:32 PM ---------- 6 hour anti-bump limit - Previous post was at 08:31 PM ----------

wanted to take photos & place in to DIY section but that time hands all black....
so decided not to.

 

[watrul3s]

Danz, good job..haha
i not dare to try jasma cam, scare it wil make the engine trouble

 

[DanzEterna]

tq bro, if single cam should be no problem as its not much problem....if twin cam maybe....better get those branded ones........anyways jasma cams comes with 1 mth warranty if not mistaken......just returned to your vendor lor....

for more info better open another thread to discuss bout jasma cams......get feedback from others

 

[^pomen_GTR^]

well....about jasma cam i'm not worry about the performance....but the reliability......can tahan or not.....


so if plan to install jasma cam i suggest to send the cam for heat treatment (quenching) first and do surface inspection/perfection before install

 

[watrul3s]

oo..my fren recommended me go for matspeed..
but cost around 2k..swt..

 

[DanzEterna]

matspeed rm2k vs jasma rm400++. thats alot of difference....
but come to think again is it really that worth it spend so much for SOHC?
if u want reliability, go for works.

 

[^pomen_GTR^]

oo..my fren recommended me go for matspeed..
but cost around 2k..swt..

really price gone up that much??? if not mistaken last time it was around 1200/pcs...re-grind cam...need to swap if i remember...

 

[93na]

matspeed enough 1800 for twincam much cheaper for single... for regrinded cams go for matspeed... got extra cash billet la.....:]... see and know so many 1.8 single cams who pumping out 150 to 160 bhp.....

 

[watrul3s]

oo..but twincam engine is expensive...

 

[watrul3s]

but hear some say tat is not worth to spent lot of money on soch engine..
izit true>?

 

[D7zul]

Whoa Danz! Hebat la you... Can modify stuff again...

I mean that's what I'm saying. Because Jasma is like an acreditation body for sports mufflers. They are not a brand and do not manufacture stuff like camshaft. Could the camshaft possibly be a tiruan thing?

Veloc,

i know what u mean.. in Malaysia, there's a lot of copycat products.. especially a piece of metal.. easy to copy.. besi ma.. then give it a name..

then, so stupid one to give name like JASMA.. their logo only can find on extractor & muffler only.. ORIGINAL PARTS..

if u find any other things using the JASMA logo/name, then confirm that it's a fake product..

here is JASMA website

JASMA@“ú–{Ž©“®ŽÔƒ}ƒtƒ‰[‹¦‰ïbƒgƒbƒvƒy[ƒW

* if u can't read japanese, search in google and click on 'translate this page'..


Thank you

 

[DanzEterna]

actually it depends on your tuner/mechanic....
my former foreman has a saga 1.5 sohc magma engine, he enters most of drag battle <1.6 category.......& win quite a number of trophies....