Overhaul Gasket

[jeroi78]

FOR SSGTi 1.3 TWINCAM DOHC
WHERE CAN I GET THIS THING
ROUGHLY HOW MUCH THE COST?

 

[nadeska]

Hi Bro jeroi78 u can call this number Sen Hui Autopart 03-4044 4600 (Sentul KL). Come and join our TT. see at TT post.

 

[kanasaii]

Only Sen Hui Autoparts, any other Autoparts??? How about metal head gasket. Anybody using? where to get? How bout $$$$????

 

[xtorm]

how much is the gasket?

 

[ABV9750]

SGP gasket already good enough for standard engine. don't waste money buying metal gasket.its thicker than normal and use for mode head.
SGP gasket already consist of good material and for high compression gti engine.
price: around rm350.

 

[xtorm]

wah....350?? mine seems leaking, cos on top of gearbox lots of engine oil..:( is not from valvle cover...any other cheaper type?

normally how much is the worksmanship?

 

[Herbie]

SGP gasket already good enough for standard engine. don't waste money buying metal gasket.its thicker than normal and use for mode head.
SGP gasket already consist of good material and for high compression gti engine.
price: around rm350.

bro need help .. where to costum metal gasket? mine is now g13b ssgti twincam .. with bolt on turbo ? already 3 original gasket pecah ...

 

[ABV9750]

how come? turbo engine use low compression piston. GTI is high compression. the SGP gasket should be much more than enough...
unless you use the wrong piston. please check.
metal gasket for gti come from suzukisport only But at Aus, they do make for gti.its a copper thick head gasket.the price is close to rm1000, 1 pcs head gasket only.

 

[ABV9750]

aiyaa...SGP gasket is good maa...still need cheap one? 2-3 times revs to redline, the gasket pecah...hehehe..

OK. there's a local made gasket which cost you rm95 only..hehehe.include the valve seal. aiyoo..very cheap maa..
BUT i'm not recommended cause its the same material as Proton local made..

try SGP set and proper top overhaul.
workmanship are depends on shop.some charge rm150. some other rm200.while most of the w/s charge rm300..hehehe..nowdays, w/s cost too much la..

goto Lee DZZ la..sure cheap..

 

[Herbie]

how come? turbo engine use low compression piston. GTI is high compression. the SGP gasket should be much more than enough...
unless you use the wrong piston. please check.
metal gasket for gti come from suzukisport only But at Aus, they do make for gti.its a copper thick head gasket.the price is close to rm1000, 1 pcs head gasket only.

i know .. but play low boost only use a stock piston .. engine still didnt show any problem .. just gasket pecah 3 times alreaddy in 2 month .. calculate engine running on road around 2 week only for 2 month others sidai at bengkel only .. please help i hear got some machine shop do the costum metal gasket .. but still didnt get the place .. please help ...

here the pic of prove..

http://img266.rockyou.com/imagehost/1/1930/1930481/1930481_be26e5ec1184143986_m.jpg

 

[ABV9750]

in your case, you can refer to turbo worksyop. i think they do have contact the source coz their engine also rojak.