Side Fender Kancil

[trxx]

how do i take off side fender kancil is it got 2 nuts?
then after removing got lots wires or not from it cause side have signal.

reason want to knock back fender dent . thanks gang

 

[howiechoo]

got 2 screw under the hood, there's another 2 at the gap between door and fender..1 below bumper, and u need to take out the protection plastic at ur tyre there about 5 / 6 puch button screw.

take out the signal first..then need to dissamble the socket only..no more wire

 

[ken yeang]

Before taking out the fender, make some marking on the fender and the car body. This is because when u put back the fender, alligning the fender back to the original position would be a nightmare. so make some marking....

 

[trxx]

quite confuse cause hard

draw using bitmap simple diagram can ?

upload here thanks

 

[howiechoo]

i dun think the align for the fender is hard..when u install back, just make sure the gap between the bonnet and ur door are same as before..then u can screw it..it's easy for kancil