Warped Front Disc Rotors

[dream.tent]

Bro , i think our friends have already pimped their rides to at least 18's, am I right?

Bump: Dream.tent why need to mod mounting ? Not direct fit meh?

Yaloh! I knew this 3 years back! So i'm rather reluctant to use the 4Pot as need to mod the mounting for the caliper.
I was a direct fit on A32 but not A33!

A32 came with twin pot but somehow A33 they decide to fit a bigger single pot instead. (Maybe they think with BA + EBD, Nissan thinks no need to have twin pot gua)

Bump:

if std ori 15inch rim, max only can use 2 pot right?

Not really.
Depending on the Rim actually. (F1 using 14" only! hhhh)

 

[sb3]

Yaloh! I knew this 3 years back! So i'm rather reluctant to use the 4Pot as need to mod the mounting for the caliper.
I was a direct fit on A32 but not A33!

A32 came with twin pot but somehow A33 they decide to fit a bigger single pot instead. (Maybe they think with BA + EBD, Nissan thinks no need to have twin pot gua)

Bump:

Not really.
Depending on the Rim actually. (F1 using 14" only! hhhh)

disc + rotor of R32 direct fit to A32? Great news man! i am using A32. I will start searching for R32 brakes set thanks for the info bro.

PS. Can I change the whole suspension and hubs setup to R32 as well?

TIA

 

[seizai]

Yaloh! I knew this 3 years back! So i'm rather reluctant to use the 4Pot as need to mod the mounting for the caliper.
I was a direct fit on A32 but not A33!

A32 came with twin pot but somehow A33 they decide to fit a bigger single pot instead. (Maybe they think with BA + EBD, Nissan thinks no need to have twin pot gua)

Bump:

Not really.
Depending on the Rim actually. (F1 using 14" only! hhhh)

mine was yr 96 original rim. some say can,　some say need to use r32 rim as well...:hmmmm:

 

[dream.tent]

disc + rotor of R32 direct fit to A32? Great news man! i am using A32. I will start searching for R32 brakes set thanks for the info bro.

PS. Can I change the whole suspension and hubs setup to R32 as well?

TIA

I think better double confirm before buying the caliper & rotor.

 

[sb3]

I think better double confirm before buying the caliper & rotor.

I bought myself 1 set of 17s today @ Klang. B4 that i've enquired about R32 rims. I was told that the said rims would cost a bomb coz its specially made to cater 4 the r32 huge brakes and caliper.Now I know why do u need to mod the mounting.

 

[weikee]

not really lah, the GTT R33 / R34 rims 1k plus or less, sometime you get it at the ZTH buysell forum. the expensive one its GTR

 

[sb3]

Been using bendix metal king . Got different comments /opinion . what do u guys think of this brake pads?

 

[weikee]

i used it few time, suck, the performance are not what i expected..still got a set at home, used for 2 months only. From what i gather, some of the bendix are local / thai made. so maybe that's the reason.


I use a cheap TRON brand, the stopping power its good, but it will make noise when its closed to stop. next will have to shop around for better brake pads and change disc also.

 

[12savefuel]

Hi all I replied that I also had a problem with rotor warpage in 2008. I think I may have finally solve my problem. I went to get a new set of rotors for my A32 3.0L. To my surprise I noticed that the 3.0L discs were much thicker than the ones I had. So I said to the shop let me see the 2.0L and the 2.0L rotor was much thinner than the 3.0L. I went to check my warped rotor and the min. thickness in 20mm and measured is 21.2mm. The new rotor min thickness is 24mm and new is 26.2mm. It is so much thicker and will be able to dissipate much more heat and there will be much less heat shock loading to the rotors cause it has much more metal. So the factory fitted the wrong discs as I had this problem since day 1 even with new rotors it would judder after 20,000km and dealt with this problem for 13years!

So if any one wants to try out my new setup, rotors are made by TRW RM145/pc. 1set RM145x2= RM290. Bendix General CT RM95. Make sure you get the 3.0L disc and measure that its 26.2mm thick.

Bendix General CT, highly recommended for the price you pay. Really good bang for the buck brake pads. Lives up to the description that the titanium coating help faster bed in and is good straight out of the box. With new rotors and pads, the braking power is already good. Just run in the pad for about 50km of slowing down 60-40km/h, 80-60km/h , 100-60km/h, 110-60km/h, 110-40km/h and 120-40km/h. With some time for the brakes to cool. Do it at night and on highway is the best.

Breaking power feels about 20-30% better than OE and the bite and the smoothness of the pad is really good. The breaking power is the same or slightly more than the OE Nissan Akibono and the EBC Kevlar pads that I have tried.

Will update again when the car has done 20,000km and see if my problem comes back.

 

[weikee]

Nah, try 2 set of Bendix General CT. push the paddle today, stop tomorrow.

So far the best bang for buck is thos come with metalic compound, push the paddle today, stop today feel. The only disadvantage is the noise it made when coming to stop. I have not try TRW, but the Paraut disc, cost me RM 500 for a pair. Maybe if i need another pair, i'll try TRW.

 

[12savefuel]

No doubt metallic pads are much better in terms of stopping power, but there are quite alot of disadvantages which comes with it also, like rotor wear, noise like you said, cold cannot stop (some pads). Its always a give and take. For those which have not tried the General CT. Its a good OE replacement (with slight improvement and smoothness in breaking) if that is what you are looking for. That was what the pad was designed for. For those who wants to stop the car on a dime, consider other pads which have better bite and better heat handling capabilities like metallic pads, carbon metallic, carbon-ceramic-metallic (CCM-endless). I don't want to mislead anyone into thinking that the General CT is a high performance pad. Its a good OE replacement at a good price cause if you get Original Nissan Akebono pads from Nissan its RM600.00! Crazy. EBC Kevlar already Rm400.00. That type of price you can get pretty good aftermarket pads. But you have to try finding it first. Its not like the 3.0L pads are as common as Honda Civic and you have thousands to choose from.

---------- Post added at 05:37 PM ---------- 6 hour anti-bump limit - Previous post was at 05:30 PM ----------

Nah, try 2 set of Bendix General CT. push the paddle today, stop tomorrow.

So far the best bang for buck is thos come with metalic compound, push the paddle today, stop today feel. The only disadvantage is the noise it made when coming to stop. I have not try TRW, but the Paraut disc, cost me RM 500 for a pair. Maybe if i need another pair, i'll try TRW.

Weikee what pads you using now for your cefiro? 2.0L or 3.0L? A32/A33?

 

[weikee]

12savefuel,

Frankly, the original Nissan pad are much better than the CT (don't talk about nissan key value), you can also get the mitsubishi triton pad, if my memory is correct is the year 2000 that share the similar pad. But the original are like 2x the price of metallic pad so is not really worth it.

I been using metallic pad, and the wear of rotor are acceptable for me.

Tell me about brake, and brake pads. I have like 4 set of used pads in my store all does not do what it claims, and i dump it to the store after no more than 2 months usage.

---------- Post added at 05:42 PM ---------- 6 hour anti-bump limit - Previous post was at 05:37 PM ----------

I am driving A32 3L.

1st round i use Tron, can get it from ebay Malaysia, that lasted me about 35kkm. Now i forgot, my friend got one for me. Like i mention before, it stop great, but noisy when coming to standstill.

I got another original brake nissan akibono pad that i brought from Japan. Need to try this one after my metallic pad run out.

 

[12savefuel]

12savefuel,

Frankly, the original Nissan pad are much better than the CT (don't talk about nissan key value), you can also get the mitsubishi triton pad, if my memory is correct is the year 2000 that share the similar pad. But the original are like 2x the price of metallic pad so is not really worth it.

I been using metallic pad, and the wear of rotor are acceptable for me.

Tell me about brake, and brake pads. I have like 4 set of used pads in my store all does not do what it claims, and i dump it to the store after no more than 2 months usage.

---------- Post added at 05:42 PM ---------- 6 hour anti-bump limit - Previous post was at 05:37 PM ----------

I am driving A32 3L.

1st round i use Tron, can get it from ebay Malaysia, that lasted me about 35kkm. Now i forgot, my friend got one for me. Like i mention before, it stop great, but noisy when coming to standstill.

I got another original brake nissan akibono pad that i brought from Japan. Need to try this one after my metallic pad run out.

Thanks for the info, let us know how your Japan Akebono goes. Cause as I said it cost me RM600! The pad is good but not worth RM600. How much you bought your akebono? Is it with nissan stamp on the back plate or is it akebono aftermarket pads (Akebono Performance, ultra premium, pro act, etc) for nissan cefiro. Mine was Akebono with Nissan stamped on the back of the pad bought from ETCM.

 

[weikee]

Is Nissan original, cause i brought it when i was in Japan. Take them 2 days find it for me.

Malaysia Nissan pad is useless, they gave me "Key Value"

 

[12savefuel]

Is Nissan original, cause i brought it when i was in Japan. Take them 2 days find it for me.

Malaysia Nissan pad is useless, they gave me "Key Value"

The brake pads that I have is original Nissan Japan which I bought from ETCM. Its not Key value. I think Key value is about Rm200 vs. Mine was RM600. Bought it from ETCM in Jln Kemajuan PJ. On the backing plate of the brake pad you can see the Akebono and NISSAN stamped on back of the brake pad backing plate. Its not an ink stamp but a metal stamp where the words are indented into the backing plate. The pads are good not not worth RM600.00. I'm not sure if ETCM has any of these pads left cause the are expensive and nobody buys them. Next time just go to ETCM in PJ Jln. Kemajuan and see if they have any left. You need to ask them for Original Nissan Japan and when you open it you should have the Akebono and Nissan stamped on the back of the pad. But why bother you can get better pads for less money.

Unless what you got in Japan was Akebono but their aftermarket series like Pro-ACT. I will take some pics and post it for you.

 

[weikee]

well, i got it less than 600, maybe just 1/2 the price of it only :)

If you can find the red akebono is even better. But is ban already.

 

[12savefuel]

well, i got it less than 600, maybe just 1/2 the price of it only :)

If you can find the red akebono is even better. But is ban already.

Wah red akebono ban ah? Never seen such a pad, the only reason why I can think that its banned is that its an asbestos based pad.

---------- Post added at 03:28 PM ---------- 6 hour anti-bump limit - Previous post was at 03:27 PM ----------

Wah red akebono ban ah? Never seen such a pad, the only reason why I can think that its banned is that its an asbestos based pad.

Anyone else has any other experience with other brake pads for Cefiro A32? Good and bad experience included.

 

[weikee]

Yes is asbestos based and it stop much better and much more lasting. Used that on my old sentra before.

For the car that weight, it really need some good stopping power. Also another upgrade can be done is the brake cylinder upgrade to a bigger one. Another alternative is get yourself a murano or Z33 single pot disc and caliper, is much bigger and need 16" rim to fit. I was given a set but can't fit into my stock 15" too bad. Next common upgrade is R32 / R33 front 4 pot caliper, this need offset 16" rims

 

[12savefuel]

Yes is asbestos based and it stop much better and much more lasting. Used that on my old sentra before.

For the car that weight, it really need some good stopping power. Also another upgrade can be done is the brake cylinder upgrade to a bigger one. Another alternative is get yourself a murano or Z33 single pot disc and caliper, is much bigger and need 16" rim to fit. I was given a set but can't fit into my stock 15" too bad. Next common upgrade is R32 / R33 front 4 pot caliper, this need offset 16" rims

Hmmm nice to have the 4pot R32/33 setup but that would cost more than the Z33 right? Then upgrade the brake cylinder to bigger one you said. Any idea from which car that is bigger and can be fitted?

But I prefer to use the stock rim lah. So bigger calipers would be out. So only option now is just pads and bigger master pump as I already have a set of brake hoses already fitted.

 

[12savefuel]

Yes is asbestos based and it stop much better and much more lasting. Used that on my old sentra before.

For the car that weight, it really need some good stopping power. Also another upgrade can be done is the brake cylinder upgrade to a bigger one. Another alternative is get yourself a murano or Z33 single pot disc and caliper, is much bigger and need 16" rim to fit. I was given a set but can't fit into my stock 15" too bad. Next common upgrade is R32 / R33 front 4 pot caliper, this need offset 16" rims

Hmmm nice to have the 4pot R32/33 setup but that would cost more than the Z33 right? Then upgrade the brake cylinder to bigger one you said. Any idea from which car that is bigger and can be fitted?

But I prefer to use the stock rim lah. So bigger calipers would be out. So only option now is just pads and bigger master pump as I already have a set of brake hoses already fitted.