Can't pass by 5k RPM

Neo_

Known Member
Joined
Sep 27, 2011
Messages
227
Points
528
Location
Kuala Lumpur
Dear Sifu's and frens ,

Yesterday i realised my car cant pass 5k rpm.
After 5k feels like tersumbat or loss of power . any idea why ?

Additional Informations :

Last service - 2K km ago . still got 5k to run
Which gear - So far starting from 3rd gear.
Just serviced aircond few days back .
Air filter cleaned last week .
Redline starts at 6.5 k .

Any idea why is this happening ? help is much appreciated. :D
thx
 
how to identify a clutch slip ?
Hmm, clutch plate also upgraded around June last year,may b clocked around 10k km with
the new clutch plate
 
Here are few possibility :

1) Throttle body cleaning or maybe a simple de-carbo job
2) Check and make sure the air-con gas pressure is correct. Incorrect pressure will put more strain on the compressor.
3) Try using fuel other than Shell ron95. My experience with Shell ron95 : car feel very light driven below 4k rpm. It takes forever even to get past 5k rpm.
4) Under inflated tyres can caused higher than usual fc
 
Here are few possibility :

1) Throttle body cleaning or maybe a simple de-carbo job
2) Check and make sure the air-con gas pressure is correct. Incorrect pressure will put more strain on the compressor.
3) Try using fuel other than Shell ron95. My experience with Shell ron95 : car feel very light driven below 4k rpm. It takes forever even to get past 5k rpm.
4) Under inflated tyres can caused higher than usual fc

i think i should check the air con gas pressure as i just serviced the air cond last week .
throttle body i just serviced few months back. anyway i will get this two things checked.

feel heavy revving up?

no bro,no such feeling.no heavy feeling.no burning smell also.
 
Check your coils. I would safely assume that would be your problem.
 
yeah.. wrong setup can make u loose top end, while good at low end...or vice versa.. u cant get them both...that's why there's turbo kit in the market..
 
Dear Neo_,

my xperien.....wif 4age BT 5 speed....lasttime when i use 2 inches piping...my car pass 5k rpm easily.....when change to 2.3 inch piping.....it go slow at 5k rpm...i means when uphill using 3rd gear lah.

so, i thk itss bcoz of back pressure problem..
 
Dear Neo_,

my xperien.....wif 4age BT 5 speed....lasttime when i use 2 inches piping...my car pass 5k rpm easily.....when change to 2.3 inch piping.....it go slow at 5k rpm...i means when uphill using 3rd gear lah.

so, i thk itss bcoz of back pressure problem..

i changed my piping around few months back.but the problem is new .
if piping bocor or what can have similiar problem ?
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience