4G91 Gang..

[partyJOE]

hahha yeah lor.....sigh keep on getting error message page....sigh...

anyway bro....just called up yong just now...he said he cant come tonite....no transport.....his car still in the workshop....

aiyah pity dat fella ho... if got any klang kakis coming 4 TT, atleast he can tumpang...
nevermind loh.... we expect better crowd 4 next TT...

 

[partyJOE]

actually if his workshop have the diagnostic tool like DSP.... very easy to detect the problem... can attend to it immediately... or not very leceh work to check wiring 1 by 1...

 

[skyline_maniac]

i dont think they have the diagnostic tool .....
yeah would be easy to detect if they have that.....

any of u know where to get wiring for 4G91?
coz yong said...halfcut shop all selling together with ECU
will cost a bomb.....

 

[tajulsans]

i dont think they have the diagnostic tool .....
yeah would be easy to detect if they have that.....

any of u know where to get wiring for 4G91?
coz yong said...halfcut shop all selling together with ECU
will cost a bomb.....

hmm, the MUT thingy will not be able to check wiring problem dude.. these kinda problem have to be checked manually.. a very2 tedious job i must say.. and sure will cost a bomb..

wanna look for wiring also not that easy.. most 1/2 cut shop dont have it pon..

 

[partyJOE]

hmm, the MUT thingy will not be able to check wiring problem dude.. these kinda problem have to be checked manually.. a very2 tedious job i must say.. and sure will cost a bomb..

wanna look for wiring also not that easy.. most 1/2 cut shop dont have it pon..

i think u r wrong ... b'cos when i use to have 'check engine' problem...
my mech put in the MUT n told the the TPS wiring is faulty...
i got it corrected at ah yoong's workshop....

as long as there is trouble code... it will source the fault....

 

[abe]

guys,my trip to ipoh cancelled...i can join u guys for TT...can anyone pm me ur contact no..so i can call if i lost later..thanx in advance

 

[partyJOE]

btw... no need to change the whole wiring 1 lar... unless the flood case or wiring bakar... just the mech trying to do a easy job dats all....

 

[partyJOE]

abe.. yea man... gr8 ... c u there..

partyJOE - 016-2644335
Skyline Maniac - 012-3613482
wirafly - 012-2939965
tajulsans - 019-3341152

 

[abe]

abe.. yea man... gr8 ... c u there..

partyJOE - 016-2644335
Skyline Maniac - 012-3613482
wirafly - 012-2939965
tajulsans - 019-3341152

thanx alot bro...c u guys later

 

[tajulsans]

i think u r wrong ... b'cos when i use to have 'check engine' problem...
my mech put in the MUT n told the the TPS wiring is faulty...
i got it corrected at ah yoong's workshop....

as long as there is trouble code... it will source the fault....

it is able to check the faulty code n TPS is quite obvious.. if ECU wiring with 30-40 wires than not so easy liau.. rite?? and if it is not anywhere related to signals.. then no hope oledi..

niway.. wanna inform u guys that alvin will also join us.. with his MEAN machine.. hehehe

 

[tajulsans]

yah.. have to agree that changing wiring is an easier job and might cost more , but if it is me, i might just go for it lah.. nothing can compare to my lost of transportation and a relieved headache..

 

[partyJOE]

yah.. have to agree that changing wiring is an easier job and might cost more , but if it is me, i might just go for it lah.. nothing can compare to my lost of transportation and a relieved headache..

yah agree 100%... better 2 get it done sooner then putting it to sleep in the workshop...

ok im chowing now c u guys ther.... damn ... im so exicited....

 

[tajulsans]

aiyak, no time to wash car.. kotor2 also have to go.. hahaha

 

[MiTec-i]

i'm not coming
sorry guys

 

[wirafly]

it is able to check the faulty code n TPS is quite obvious.. if ECU wiring with 30-40 wires than not so easy liau.. rite?? and if it is not anywhere related to signals.. then no hope oledi..

niway.. wanna inform u guys that alvin will also join us.. with his MEAN machine.. hehehe

Agree, wiring problem is not that easy to solved, MUT device is not able to communicate with the ECU if communication between ECU and MUT got problem. :(

It all depend on the wireman work during engine transplant, some wireman as long as we can start the car then their job done, thats why alot car after conversion within one year wanna sell their car eventhought they spend alot, because it going to be very very troublesome to find out which wire cause the problem, some car even catched in fire, which I worry after engine conversion, my colleague even ask me buy small fire extinguisher and put in my car....sigh...hope my foreman work on my car fine

 

[tajulsans]

Last Night TT was just nice.. thanx to all that have make themselves available..

Attendance:

1. Partyjoe
2. Wirafly
3. Skyline Maniac
4. Lancer Terabo & Bro
5. Tajulsans
6. Alvin24
7. Yong 5290

Agenda:

We gathered at the caltex at 9.xxpm.. Me as one of the late comers, so not sure the sequence of arrival.. at about 10pm we all convoy to Sedap, Dataran Prima (except for wirafly,yong and alvin, they went straight to Sedap). The convoy went slow2 only, everyone malu to start burning rubbers, :D

The talk cock session at Sedap went on until about 1am when alvin have to leave home, mummy looking for him oledi, or maybe dont wanna give us a test ride in his mean machine leh.. jk jk.. at about 1.30am, we gathered at our cars for photo shoot of our engine bay, and some minor DIY repair job on skyline's plug cable..

1.50am shoot home time.. everybody went home with a sleepy face..

other comment:

Partyjoe ular the whole daytime to wash and polish his car b4 TT.. hahahahah

 

[LancerTerabo]

Perghhhh... Detail tuuuu

Last Night TT was just nice.. thanx to all that have make themselves available..

Attendance:

1. Partyjoe
2. Wirafly
3. Skyline Maniac
4. Lancer Terabo & Bro
5. Tajulsans
6. Alvin24
7. Yong 5290

Agenda:

We gathered at the caltex at 9.xxpm.. Me as one of the late comers, so not sure the sequence of arrival.. at about 10pm we all convoy to Sedap, Dataran Prima (except for wirafly,yong and alvin, they went straight to Sedap). The convoy went slow2 only, everyone malu to start burning rubbers, :D

The talk cock session at Sedap went on until about 1am when alvin have to leave home, mummy looking for him oledi, or maybe dont wanna give us a test ride in his mean machine leh.. jk jk.. at about 1.30am, we gathered at our cars for photo shoot of our engine bay, and some minor DIY repair job on skyline's plug cable..

1.50am shoot home time.. everybody went home with a sleepy face..

other comment:

Partyjoe ular the whole daytime to wash and polish his car b4 TT.. hahahahah

thanks taiko tajulsan. detail report for other member.

i tot... have road rumble with all new member... haiya... only us ar... ha ha ha...

taiko alvin... wa... so impress bout yer evo's, can pinjam yer engine for a few day ar? ha ha ha...

sowi gang... lama tak online. and i dunno our new xtvt. thank to partyjoe to call me just b4 gath. if not i oso dunno hav gath last sat night...

i thing this our last meeting for this year. so... we still dint achive our target. to perform a biger gath on da plenet... ha hah a... maybe next year.

 

[wirafly]

thanks taiko tajulsan. detail report for other member.

i tot... have road rumble with all new member... haiya... only us ar... ha ha ha...

taiko alvin... wa... so impress bout yer evo's, can pinjam yer engine for a few day ar? ha ha ha...

sowi gang... lama tak online. and i dunno our new xtvt. thank to partyjoe to call me just b4 gath. if not i oso dunno hav gath last sat night...

i thing this our last meeting for this year. so... we still dint achive our target. to perform a biger gath on da plenet... ha hah a... maybe next year.

LancerTerabo, that night after TT you cucuk me ah? damn...I suddenly saw one car tiong me very close behind....

 

[partyJOE]

it was gr8 TT guys...
thumbs up to all of us...
here r sum photos...


cars line up.... missing wirafly's ride... :p

 

[wirafly]

damn partyjoe....next time dun wan TT liaw :'(