Car body tear / crack

[gIGoN]

Hi guys, i was looking at my car just now and i noticed there's a crack at the front panel of the body frame (the part near those radiators / behind the bumper). There's a crack and i'm worried my whole front part will fall apart.

Could you guys recommend what i should do and any workshop is good in repairing or fixing this.

 

[mohazam]

did you involved in any accident before?

 

[gIGoN]

nope...i changed my engine (evo3) and it's been in there since 2006. Do normal repair shop could repair cracks at the body frame? if someone has done this, please let me know how much were u charged at least i could estimate my budget...

 

[jinkl]

Hi guys, i was looking at my car just now and i noticed there's a crack at the front panel of the body frame (the part near those radiators / behind the bumper). There's a crack and i'm worried my whole front part will fall apart.

Could you guys recommend what i should do and any workshop is good in repairing or fixing this.

the fix should cost u around 400-500 bucks
first things , u need to buy a new front frame , prefered evo 123
then u need to bring it to a bodywork shop who is familiar with changing it, it involves welding , etc

 

[S1997]

sounds familiar ;)

 

[gIGoN]

the fix should cost u around 400-500 bucks
first things , u need to buy a new front frame , prefered evo 123
then u need to bring it to a bodywork shop who is familiar with changing it, it involves welding , etc

thanks fer the reply....do u know any workshop good with this? any you could recommend or familiar with the price range above...i need to send my car tomorrow bro...coz it's my daily car :(

 

[93na]

thanks fer the reply....do u know any workshop good with this? any you could recommend or familiar with the price range above...i need to send my car tomorrow bro...coz it's my daily car :(

bro i m facin the same problem but mine had an accident!!! the total cost for me is 700 together wit a gsr panel!!!!! i m staying around ampang.... most body shop or ketuk shop shpuld be able to do it by the sound of it your is not to bad!..........

 

[gIGoN]

bro i m facin the same problem but mine had an accident!!! the total cost for me is 700 together wit a gsr panel!!!!! i m staying around ampang.... most body shop or ketuk shop shpuld be able to do it by the sound of it your is not to bad!..........

where is the workshop bro, do u have the contact number?

 

[8229]

bro, last time its happen to me, even worst, not only the front upper panel that in front the radiator, its also crack below front panel that is near to cross member, both already weld back its crack again, so i just get a front panel from empty gsr halfcut from my friend, the only cost is workmanship at body repair shop that is near pandan indah industries area...

If possible please advise ur mechanic or anything that is need to be jack at your front car to be always jack from side of the car or at left or right side of your front car only. Do not jack your car in the front middle. Its a weak spot in the middle.

To save your cost, buy the front panel from any transplant workshop that have the empty body. i do not have the workshop phone number but i still remember where is it.

 

[EvolutionZ]

my location around kepong......

 

[gIGoN]

guys,

just took the car today....did it at thomas tmn sri muda....all i could say is that i'm much impressedwith their work, no senget, everything kawtim!....now my car is at another workshop doing my 2.2cc project haha =)