Gauging interest on plasti dip

[SloMo]

SupFan : "SPARE"? Bugger, if I catch you buying 5 cans of black spray for "SPARE" I will key kaokao your precious car then stick tampons all over your windscreen.

woohoo somebody is having PMS today

 

[Supra_Fanatics]

woohoo somebody is having PMS today

Izso Volcano erupted adi for not being able to find Black PD lately

 

[vr2turbo]

Actually i already ask all country PD and their policy is not to ship out PD to other country. ACE can ship direct from US because ACE is hardware chainstore in US,so they got the permit to do so. US PD is cheap if not including shipping fee.

Ah! means ACE ship from Ace US, I think. If PD refuse to sell means they control distributor and agents.
Unless you can get cheap from dealers, like from Thailand, then shipping also cheaper....

---------- Post added at 02:46 PM ---------- 6 hour anti-bump limit - Previous post was at 02:45 PM ----------

Better cabut with 5 cans on hand when I see Izso coming into ACE :vroam:

Got buy spare also will say no loh!, but see him in ACE then you chialat loh! or hide those Dips.....

 

[stupidcar]

Ikano no blackkkkkkkkk!!! Went just now. And they are tidying up the place.

 

[Supra_Fanatics]

Ah! means ACE ship from Ace US, I think. If PD refuse to sell means they control distributor and agents.
Unless you can get cheap from dealers, like from Thailand, then shipping also cheaper....

Got buy spare also will say no loh!, but see him in ACE then you chialat loh! or hide those Dips.....

Haha! Ya, take all 5 cans and hide in the shop until he leaves.

Ikano no blackkkkkkkkk!!! Went just now. And they are tidying up the place.

even if got black, surely become no more black again. Cuz all sapu by u already

 

[PocketRocket]

might need a couple red soon.

Next on my dip list

 

[Izso]

Pocroc, PD can stand the heat? And you DIY dismantle the manifold or is that a skunk manifold for your Hybrid? How much?

 

[cvkit17]

Pocroc, PD can stand the heat? And you DIY dismantle the manifold or is that a skunk manifold for your Hybrid? How much?

Fonzie mentioned that it can withstand up to 300C. He even dipped exhausts of some car. Worth the try

 

[wyldemdd]

Pocroc, PD can stand the heat? And you DIY dismantle the manifold or is that a skunk manifold for your Hybrid? How much?

Can it stand the heat??? spray your wira bonnet and you'll know
I give you an example :)

 

[Supra_Fanatics]

The thing about Dipping different colours on our dips, is it okay to tape the part where we already dipped before? Just afraid that it would tear off the dip,

I experienced once wear I need to touch up so cover up certain area of the DIP, end up, I can see 2
layers of dip on the same surface after tearing out the tape, leave 1 line across...

 

[stupidcar]

even if got black, surely become no more black again. Cuz all sapu by u already

No wor. Just syok syok help u guys see only. I free ma. Went there to do income tax thing.
No money to buy. If got money, my rims are black dy.

 

[wyldemdd]

I'm going ACE publika later at lunch time. Any1 need black spray PD??? If got i can help buy,can come damansara perdana to collect from me :)

 

[Supra_Fanatics]

I'm going ACE publika later at lunch time. Any1 need black spray PD??? If got i can help buy,can come damansara perdana to collect from me :)

So kind of you, buy 1st if u see any, sure got people want. Izso will be the 1st to PM u haha!

 

[PocketRocket]

Pocroc, PD can stand the heat? And you DIY dismantle the manifold or is that a skunk manifold for your Hybrid? How much?

It can stand between 300-400 degrees...i was thinking of dipping the calipers too.... This is just a Fit manifold. PnP to L-Series engines like Jazz, City and CR-Z, Maybe Insight. Revs lighter and more air is captured before feeding into the runners.

Skank2 sticker je... My marketing skills convey diff speculations of authenticity...muahahahaha! Was looking into rubberizing the manifold cuz it insulates or delays the heating in the chamber. Minimal gains but damn the DIY BUG!

 

[Supra_Fanatics]

It can stand between 300-400 degrees...i was thinking of dipping the calipers too.... This is just a Fit manifold. PnP to L-Series engines like Jazz, City and CR-Z, Maybe Insight. Revs lighter and more air is captured before feeding into the runners.

Skank2 sticker je... My marketing skills convey diff speculations of authenticity...muahahahaha! Was looking into rubberizing the manifold cuz it insulates or delays the heating in the chamber. Minimal gains but damn the DIY BUG!

Wanted to dip the Kelisa Exhaust as well, since previously the tip did break into half due to rust. My
exhaust tip drop somewhere when driving, not sure if it did hit anyone.

Didnt notice until the next day.

 

[stupidcar]

Wanted to dip the Kelisa Exhaust as well, since previously the tip did break into half due to rust. My
exhaust tip drop somewhere when driving, not sure if it did hit anyone.

Didnt notice until the next day.

How u guys sprayed exhaust la? Cabut the whole thing? Mine is not pointed out.
Just ngam ngam with the bodykit. :\

 

[Supra_Fanatics]

How u guys sprayed exhaust la? Cabut the whole thing? Mine is not pointed out.
Just ngam ngam with the bodykit. :\

All stock cars also ngam ngam mia. I don't intend to have a very smooth surface. Just doing as protection since no one can see it anyway. just want to coat it

Cabut whole thing, unless u ask ur mech to cabut then u plastidip at his shop

 

[stupidcar]

All stock cars also ngam ngam mia. I don't intend to have a very smooth surface. Just doing as protection since no one can see it anyway. just want to coat it

Cabut whole thing, unless u ask ur mech to cabut then u plastidip at his shop

Matte black also? :D

 

[stupidcar]

Guys, 'TT' at TTA? :D

 

[Supra_Fanatics]

Matte black also? :D

Ya matte black also, gonna be weird if I have red exhaust tips LOL