How to "ketuk" fender

[azir]

anyone know how to knock the fender. my rear fender need to "ketuk" la, my 16" rims sangkut ......
i have an experience ketuk my bro fender...paint crack, how to avoid this aa.... my idea is to ketuk+water on my fender, coz my logic here, water can cause the body@area cold......

 

[gavan]

bro, i also ketuk my fender and the paint crack also....so i think best is ketuk and ketuk, then later touch up, i dont think there is a way for it not to crack....paint is hard when dried, so, sure crack wan....

 

[reddice]

im also using 16inch..on satria..the trick is ketuk until cannot ketuk anymore..seriously..knock it hard..very hard..im using satria GTI original set.and the set is cutted.and the fender inside is being knock..hard..if that cannot solve your problem..use "batang paip"..they put it in the space between the tyres and the fender and push the fender out..unbeliveable?believe it..

 

[partyJOE]

i ketuk with the rubber hammer... bought from 2rm shop....
no cracks or chip offs... only ketuk da upper part... other parts wont kena 1...
give it a try...

 

[azir]

im also using 16inch..on satria..the trick is ketuk until cannot ketuk anymore..seriously..knock it hard..very hard..im using satria GTI original set.and the set is cutted.and the fender inside is being knock..hard..if that cannot solve your problem..use "batang paip"..they put it in the space between the tyres and the fender and push the fender out..unbeliveable?believe it..

ketuk very hard ke? surely paint crack, other that u r using GTI fender, sure the ketuk fender can see...

 

[masvidal]

last time when using 17" rims, i grind the inner side of the fender.

 

[Concept]

to avoid the paint peel or crack, cut the paint with small knife and knock fender.

 

[whatdamn]

the steel pipe method is better. even the jap drifters are using that technique cause it gives a more uniform arch than 'ketuk'-ing. can't remember which option video volume had it.

 

[eddie368]

my wira rear fender always kena tyre... cos rim is wide... how to use paip
n push up using 15 inchgo the gap is quite high

 

[LilKeV84]

hhmm...my fender after accident(prev owner) they din ketuk nicely...if see properly left and right diff shape a bit 1...space between tyre and fender of both sides oso diff 1

using pipe...sounds quite like a good idea...should try it b4 i paint my car :p

 

[sam1741]

hi all...
i confused.. anyone can teach me?

ketuk fender?
u mean knock which part?
is it outside or inside?
make it more outside so it wont touch the tyre?
or make it more high so it wont touch the tyre?