inquire on conversion ae111 6sp into ae101...

[meandmebitch]

hi everyone,
recently just bought an ae111 levin 6sp hcut..
wanna convert into my ae101 gonna put in everything includin the dashboard, just wonderin whether i might face any problems with anything from wiring to mountings??
hope someone can help me with this issue...
thanks...

 

[ahaw]

good mechanic/foreman wud solve that

p/s: better swap everythg frm 1/2 cut so not much problem

 

[scottwrx]

u need to customised a plate for the engine mounting at the gearbox area, coz 6 speed is different from 5 speed, as for wiring if u r using the levin dashboard then i dun think go any problem, but if u plan to use ori dash board, u either use the levin meter or find a wagon ae101 meter and do wiring... as for air con switch, i DIY to fit the aircon swtich to ae101 dash...

Bump: u need to customised a plate for the engine mounting at the gearbox area, coz 6 speed is different from 5 speed, as for wiring if u r using the levin dashboard then i dun think go any problem, but if u plan to use ori dash board, u either use the levin meter or find a wagon ae101 meter and do wiring... as for air con switch, i DIY to fit the aircon swtich to ae101 dash...

 

[linkeong]

I heard you can use ae92 mounting plate for 6 speed?

 

[EDRA]

U find ee100 gearbox mounting plate. its fix nicely. no need to modi.
if u want more info about swap this engine. just find the earlier thread. u will get more info there.

 

[meandmebitch]

thanks guys for the info,
will try the ee100 mounting 1st, btw i'm currently using 1.6 auto tranny..
no difference oso rite??

 

[blutuik]

hi fren,
come 4 a TT here la when ur project finish....

 

[meandmebitch]

will surely do bro..
will meet up b4 i go the conversion i guess..
wanna clarify some stuff before i do the conversion,

btw jus wanna check,
the hcut i bought comes with drivers and passengers airbag so i guess its a bzr hcut??
any difference wit the bzg?? in terms of hp is the same rite??

 

[20vturbo]

bz-r=6 speed
bz-g=5speed/auto

bz-g trimming more like luxury i think..bz-r bumper got round spot lite.

 

[blutuik]

sure can bro.....
just gimme a ring.....
anytime will do..

err..this weekend im not avail la..i balik kampung..

 

[cybtech]

BT6spd fits in EE101 chassis no problems except one; the mounting at timing belt side.
due to EE101 uses 1.3 carb, mounting holes there and 1.6 is different (other mountings no prob - please correct me if i'm wrong). when swapping, please ask the foreman/mech to mod (drill & weld 2 nuts) for secure, don be like mine, l8r when accelerate you'll hear thump at your engine bay (engine lompat).

Anything can be assemble to EE101, just that if there is a will there is a way... :proud:
My advise: if you wan easy jobs... try to find AE111 carib parts, it'll fits without any drastic jobs
My 2cents....

 

[meandmebitch]

thanks for the advice guys....