Large Disc Brake for Myvi Help!!!

[DJgErM]

its fits perfectly with almost all 14" rims..

 

[chrissiew]

You can get it from half cut shops :) i got mine from another forumer but it's EK brakes which is similar with EG and I would say the brake really perform well :) but make sure you have at least 15" rims because it doesn't really fit well in 14" stock rim :)

Brother, i got the eg brake at chop shop. But the screw hole was different, where did u modify the bracket convert to myvi? mind to share?

 

[jun_ng_1208]

Brother, i got the eg brake at chop shop. But the screw hole was different, where did u modify the bracket convert to myvi? mind to share?

Which screw hole??The 4 holes??? And how do you define different?

 

[8229]

bro, search at zth marketplace > chassis and wheel...

now they use wira disk to myvi knuckle with special spacer.. very got solution also...

 

[chrissiew]

Which screw hole??The 4 holes??? And how do you define different?

Not the screw to lock the wheel, is the caliper bracket at behind the disc rotor.

---------- Post added at 09:53 PM ---------- 6 hour anti-bump limit - Previous post was at 09:49 PM ----------

bro, search at zth marketplace > chassis and wheel...

now they use wira disk to myvi knuckle with special spacer.. very got solution also...

Bro, thanks for your advice, that product i saw it, its really works for certain problem. But my problem is the caliper, not the disc rotor.

 

[jun_ng_1208]

Not the screw to lock the wheel, is the caliper bracket at behind the disc rotor.

I see...you need to do some threading work on your knuckle...happened to me last time, but when you bring it over to a workshop to install, they should have 'gaodim' all for you :) where are you installing it?

 

[DJgErM]

i do believe that there are ready made conversion brackets

fyi even u have the brackets..some edges of the EG brake supporting bracket will have to be shaved off

 

[chrissiew]

i do believe that there are ready made conversion brackets

fyi even u have the brackets..some edges of the EG brake supporting bracket will have to be shaved off

Brother, where the shop has carry ready make bracket?

 

[angle-d5]

aiyo~ gombak area many place have try go Kepong Lama Jusco nearby de food court there got many car workshop~ my AE front disc and rx-7 rear also there install geh... so far so on mou man tai!!

 

[infinity.melvin]

may i know how much roughly labour charges for installing this brake kit?

need to change oil and so on?
pls advice, thanks