Megasquirt

[H2Zero]

i have been to Macau a couple of times but always in the wekeeknds when they are closed for business... there are quite a few chop shops here in Hong KOng too but am still not very familiar with the roads here as most is located away from the city..... thnaks for the tip. Cheers.

 

[khoyos]

as of now, took out std car wirings to be altered to work with MS.

so far, these items are taken out

more pics coming soon

 

[khoyos]

my ecu fully assembled and simulated using cipan's megastim, and displayed using cipan's megaview. looks like more n more people are asking him to assemble megasquirt kits...

will take installation n tuning pics if i have the chance... most likely will be installed tomorrow

 

[hattech-v]

wahhhh..... khoyos monster will bcome more powerful laa after this... abis abis...

 

[khoyos]

no matter what, still old technology 1.6 engine with small turbo. cant go far :( need bigger turbo

 

[khoyos]

more pics
GM coolant temperature sensor

GM intake air temperature sensor

wirings back in. only a few wires left compared to original wiring loom.

car will be ready soon... feedback will be given, with full report on costs, time taken, etc etc

 

[khoyos]

yesterday: engine fired up but could not idle properly. no tune yet. so just let the engine idle for a while, and shut off engine in preparation for today.
today: when i came to cipan's place, the car has got a base tune just for idling, no tune for cruising yet. what i noticed, is that the turbo spooling sound is superb!!! maybe because of removal of airflow sensor. so the car now is already tuned. and is now back home. will improve on tunings maybe this weekend.

and, after i reached home happily, got a love letter from JPJ, asking me to have my car go thru inspection at puspakom!!! what a day!!!

 

[khoyos]

the assembled ecu pic

 

[ivan78]

just free to finish my MS1 extra. take 1 day to assemble. tested with 4age 20v loom running waste spark and work fine. will try to install in 16v soon.

 

[xtorm]

with MS i can run my engine with out a MAF? how much tis thing cost anyway if i wan to completely replace my existing comp?

interested to install in my swift, there is a pretty good write up here for swift g13b engine but i dun quite understand wat it writes...... :P
http://caaarlo.50megs.com/

would lov to know the rough pricing

 

[cipan_supercas]

without MAF?..yes..

khoyos had posted the pricing list in page 4.

:)

 

[xtorm]

k thx...basically tis is a diy stuff! nice but patient needed!

edit:

is ms 2 with v3 board worth the xtra rm400? ms1 with v2.2 board going for 140us and ms2 with v3 board is us250

 

[LyPaN]

nice job to Mr Cipan n Khoyos..
after this 4G93T cannot cari makan la...
heheh

 

[khoyos]

http://i5.photobucket.com/albums/y200/sumjor/241220061257.jpg
http://i5.photobucket.com/albums/y200/sumjor/251220061258.jpg
Megasquirt engine management system featured on Import Tuner magazine a number of times already

 

[cipan_supercas]

wonder when will the local mag do the feature of this MS thingy.

 

[hahaboy]

i wanna buy ms , but ms1 or 2 ? what sensor and accesories should i buy for 20v bt

 

[cipan_supercas]

20V bt is using distributor. You can use any model... just ask your wallet.

 

[xtorm]

juz wana know, are all the sensors input same for v3 and v2.2 board? tat site i posted b4 is using v2.2 board and im planing to use v3 board.

where can i buy a wideband O2?

 

[cipan_supercas]

yes, they share the same sensors.
Diyautotune also sells wideband O2.
Visit them. If you want to buy here locally,
it's also available. ask around. Innovate
and Dynojets are available.

 

[fordb6t]

Hey Cipan,
I am back.
I just send an sms to your 012 number.....not sure if u got it or not..
Let me know kay :)
I will try to call you tomorrow ....today tiring day.... heheheh