Microtech

i did the resistance test before.. all reading are the same. when i was free i will take out the plug to see which injector run richer..
 
500hp at flywheel no probs bro.
u should use a ltx12s ecu if u wanna use a microtech.
the famous drift car in australia the gold colour r33 with ppg signage on it uses that la ecu as well..

pathfinder said:
vteckiller..


for RB26DETT....if use twin GT2530 and targeting 500bhp flywheel,
which microtech u reccomended?

any well known/proven RB26DETT with microtech as reference?

tq
 
t0il3t_duck said:
there's one r34 in the workshop tunning with microtech now....
where's josh by the way....?

sorry could not come online for 3weeks my pc at home spoilt and my damn lap top at the same time had to break at the same time..anyway got new one now so can get online again now...
anyway yups the r34 uses microtech..
no probs at all...
 
if your car is stock usually on engine... for N/a la..
but if turbo can get on wheel figures easiely.

cheers
joshua

muheez_17 said:
josh,
I spoke to you earlier....
You mentioned a 15-20Hp increase on a stock car. Is that on engine or at the wheel?? Thanks......
 
bro... ur best price for the Microtech LTX 10s how much? installation and everything.

For Wira 1.8 DOHC 4G93P.

Thanks. :biggrin:
 
hey vtechkiller..
i'm planning to upgrade to a bigger turbo

so plan to get a stand alone ecu too. or not don't think so my engine can take it on high boost. thought of Haltech e6x. but abit pricey. i wanna know more bout microtech and how much izzit that's equavalent to e6x? installation.. dyno and EVERYTHING..?

and as far as i know microtech don have the anti lagging system thinggy like haltech has.. izzit true? and haltech can use on any car but microtech only specific??
 
price is about 4,000 for the stand alone plus installation and tuning.
anti lag yes microtech has that so does it have launch control.
yes its car specify..
more like make specify..if microtech for mitsubishi it can be used for almost all mitsubishi.
no probs...
honda all honda's 4tooth,16tooth or 24tooth. all also can..
so follow make.

thats about it.
more info sms or call me or email me.

[email protected]
0123205454

cheers
Joshua

vyx said:
hey vtechkiller..
i'm planning to upgrade to a bigger turbo

so plan to get a stand alone ecu too. or not don't think so my engine can take it on high boost. thought of Haltech e6x. but abit pricey. i wanna know more bout microtech and how much izzit that's equavalent to e6x? installation.. dyno and EVERYTHING..?

and as far as i know microtech don have the anti lagging system thinggy like haltech has.. izzit true? and haltech can use on any car but microtech only specific??
 
best price can do for u is Rm4300
full instaltion,etc..etc.. on the road.
if u want to trade in old wiring computerbox,airflow etc..also can no probs..
can give u good price for that too...

cheers
JOSHUA


CARENT said:
bro... ur best price for the Microtech LTX 10s how much? installation and everything.

For Wira 1.8 DOHC 4G93P.

Thanks. :biggrin:
 
vteckiller said:
best price can do for u is Rm4300
full instaltion,etc..etc.. on the road.
if u want to trade in old wiring computerbox,airflow etc..also can no probs..
can give u good price for that too...

cheers
JOSHUA

Bro,

Does this include the coils?

Tried to call your office but cannot la.... :frown:

What happen?

CAn integrate S AFCII?

:smile:
 
coils will have to retain the stock coils.
if u change coils u will also have to buy plug cables. so not worth it.
coils not included in conclusion.but u'll get the best tuning i garantee.


CARENT said:
Bro,

Does this include the coils?

Tried to call your office but cannot la.... :frown:

What happen?

CAn integrate S AFCII?


:smile:
 
Now for vtec also available...
tested and proven.
garantee splendid improvement...

microtech has proven itself even at putra racing drag event in sepang on saturday. microtech powered vtecs has taken championships.
 
Promotion for HONDA VTEC

Microtech engine Managements System for HONDA VTEC

special pricing RM3800 only for first 10 customers then normal RM4000.
LT10s plus install and tuning. stand alone ecu.

month of october promotion.

sms me for more enquiry or booking.
012 3205454 JOSHUA
or email at
[email protected]

cheers.
Joshua T
millennium motorsports asia
 
For MITSUBISHI and PROTON USERS or even other make:-

Prices for LT10s plus install and tune will be RM4300.


In the mean while the LT4/MT4 price will still remain the same at RM2800

+plus install and tuning with a full 1year warantee and 100% back up.
 
Thank you for spending your time for tune my car today ... I will planning for my next upgrade soon... That time need your help again ... heheheh ...

Thanks alot to Microtech and Joshua tuning skill .....
 
vteckiller said:
For MITSUBISHI and PROTON USERS or even other make:-

Prices for LT10s plus install and tune will be RM4300.


In the mean while the LT4/MT4 price will still remain the same at RM2800

+plus install and tuning with a full 1year warantee and 100% back up.

Bro,

how come offer to Vtec better price?
 
coz its special price for honda's la...
promotion ma...
summore australia give special price a bit ma so we also give special price a bit for honda la.
cheap cheap for u.
i wish mitusbishi also got special price..kekeke ;)

CARENT said:
Bro,

how come offer to Vtec better price?
 
No probs bro..my pleasure tuning your car for u.

CSx8213x said:
Thank you for spending your time for tune my car today ... I will planning for my next upgrade soon... That time need your help again ... heheheh ...

Thanks alot to Microtech and Joshua tuning skill .....
 
Joshua,
I already has the 4 pc of Bosch coil but my original spark plug cable cannot go into the bosch coil , you have/ know any wire that are good for Bosch coil on 4age 16V engine?
 
vteckiller i want to ask you is the LT10s can use on MD-MIVEC??can it on the MD and MIVEC ?? now i am na but wan i chang to turbo can use it back?? can it collter the MD and MIVEC will ?? can you please list the LT10s function !! i want to know !! ok please !
 
yup stock vr4 one will fit..
use them they are long enough and will fit perfectly.

KL3873Q said:
Joshua,
I already has the 4 pc of Bosch coil but my original spark plug cable cannot go into the bosch coil , you have/ know any wire that are good for Bosch coil on 4age 16V engine?
 

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience