mods on Accord CF4

[dzulx]

Wow! Home come so stiff one.
The original set from Tein comes with 6kg Rear and 8 kg front.
What is yr spring diameter 60 or 65mm ?

T-R

I thought flex has standard spring diameter. I guess 70mm front 65mm rear.. not sure.. I refered to manual posted in tein homepage.

 

[amdfaisal]

dzulx,

u showed us where to look for the spring rate... but i can't seem to find mine le... is it clearly written on the spring? the most obvious label is 'gas-filled do not this n that'...

avant... planning to use EDFC ke? the new one in N1 is now the second generation with smaller motor and different casing colour like the one edddial is using...

 

[aja]

dzulx,

u showed us where to look for the spring rate... but i can't seem to find mine le... is it clearly written on the spring? the most obvious label is 'gas-filled do not this n that'...

avant... planning to use EDFC ke? the new one in N1 is now the second generation with smaller motor and different casing colour like the one edddial is using...

Faizal,

Langkawi got 1 seafood restoran name "nelayan" at Kuah hospital there. From Kuah town turn left...a bit corner left side. Seaside. some of the binatangs ( crabs, prawn etc) still alive. Fresh seafood.

 

[amdfaisal]

crabs, prawns still alive ka??? wow... any fresher must go catch yourself le heheh... maybe i can try tomorrow. tonight stuffed my tummy with siakap oredy heheh... down the drain went my ambition to lose weight to lighten the total weight of my car hehe

anyway on my way to kuala perlis encountered one fast vios... stock standard... i could easily out accelerate him but while i was busy hitting the speed limiter that guy was sticking right behind me... demn...

tuned-r,

since you said that technically you are good, i am wondering if i can easily mate the cylinder of of an SiR or SiR-T to my F20B SOHC VTEC. Some ppl in the states have successfully swapped the head of an H22A to the F20A/F22A block if not mistaken. Anyway since F20B is in fact the smaller twin brother of the H22A, i think F20B DOHC VTEC head should be the same as the head of H22A. both are closed-deck blocks if my memory serves me rite.

next two weeks I'm planning to go to LHS to check the feasability of this head swap in the honda accord catalogue there but if you have the info then don't hesitate to tell me. planning to DIY if it's feasible.

IMO the things that need to be changed are
- ECU
- Wiring perhaps
- head of course (together with camshafts, distri, etc etc)

benefit of head swap
- no need to go to JPJ to do endorsement...
- roadtax for 2.0 engine
- low cost

drawbacks
- lower power than H22A obviously
- will still dream about H22A hehe
- etc etc

 

[khairiaz]

fuh, more and more people become owners of CF4/CL1 these days.

jester. where are you? do you want to open 'mods for CF4 ex-owners'? hahahaha...

 

[khairiaz]

amdfaisal, which area in KL are you looking for the condo?

 

[khairiaz]

All CF-ian kaya2 except me la.. RMT (Rancangan Rakyat Ter-Miskin)

aja, don't forget PPRT la...how's your happy modding with Myvi?

 

[amdfaisal]

searching around wangsa maju area or any other places where putra lrt is not too far away. my office is just beside dang wangi station... want to take lrt to work la... tired of driving

amdfaisal, which area in KL are you looking for the condo?

 

[5efte]

End of this month

All CF-ian kaya2 except me la.. RMT (Rancangan Rakyat Ter-Miskin)

Hehehe.....


But for muslim end of this year. Hari raya korban is round the corner. Korban lembu 1 bahagian only rm300.00. Also dont forget pay ur zakat wang simpanan cukup tahun 2.5%.........for

 

[aja]

Zakat for sure la. People like me of course among those yang dapat zakat la. hehehe

Anyway Faizal, I'm in Penang/Kedah now. On the way back on Monday mau jalan2 kedai potong me let me know la. Can scout for CL1 halfcut la. kekeke

 

[ehsean]

aja: CL1 intake manifold same as F20B's ?

 

[aja]

aja: CL1 intake manifold same as F20B's ?

Different

 

[edddial]

Zakat for sure la. People like me of course among those yang dapat zakat la. hehehe

Anyway Faizal, I'm in Penang/Kedah now. On the way back on Monday mau jalan2 kedai potong me let me know la. Can scout for CL1 halfcut la. kekeke

Aja, in Northern with CL1 or Myvi? If you found any CL1 halfcut can you ask what the best price? Can you help to check for body part, the Accord Euro-R rear bumper + bonnet + lamps, and in case they also have side skirts & front bumper.

BTW, business or cuti kat sana?

 

[ehsean]

aja: can show pics of CL1 manifold?

 

[edddial]

ehsean, still awake ka? r u changing your manifold to CL1's?

Some reference for you, but it's not stock one but Feels. Click on exhaust manifold, perhaps it's identical to the stock CL1's.
http://www.hondatwincam.co.jp/e/catalog/euro-r/index.html

 

[aja]

aja: can show pics of CL1 manifold?

Ok, will do later once i comeback.

 

[aja]

Aja, in Northern with CL1 or Myvi? If you found any CL1 halfcut can you ask what the best price? Can you help to check for body part, the Accord Euro-R rear bumper + bonnet + lamps, and in case they also have side skirts & front bumper.

BTW, business or cuti kat sana?

Jalan2 here with Myvi of course. The island is now massive jams. Small auto car good for celok2 but high speeding is miserable. hehe

Esok pagi going to kedai potong somewhere around Bukit Mertajam & Butterworth there. See what can i find there. If got any will immidiately sms u. hehe

 

[ehsean]

aja: thanks :P

eddial: wasn't gonna change it, just wondering how big CL1 intake manifold is compared to CF4, seen's civic type R's intake manifold, quite huge

 

[ehsean]

saw one CL1 black, around my area old klang rd, can't remember the number plate, something W?? 94

don't know converted or not, hehehe, chinese driving
but 100% confirmed not using orginal CL1 rims

 

[amdfaisal]

ehsean... i seem to remember that plate number... if not mistaken that car is just an SiR with full euro r exterior n interior minus the meter cluster and the knuckles. the previous owner of the car wanted to sell to me the whole euro R external bodyparts but then he canceled since he wanted to sell the car with all euro r bodykits