NEW Hybrid Copies Intercoolers!!

[Garage-R]

BY THE WAY GUYS, these are pictures of one of our customer's car, installed with the Hybrid-copied 550mm X 300mm X 76mm intercooler.....installation was done in JFA Sunway. Our only recommended piping fabricator and specialist..Hopefully, the owner will see this thread and give us some comments... :) ....thank you again to the owner....

There will be other owners' pictures posted as soon as they get their intercoolers installed.....check it out soon....FORD LYNX....

 

[Garage-R]

Bump!!....come and view the intercoolers!!

 

[kith]

Thanks Kith......very nice dealing with you.....thank you very much...... :)

Ur welcome guys.. the intercooler really damn chun on my car.. PPl out there the intercooler is really worth it.. the flow is good and it's worth the money...

 

[kith]

Ken the airflow is pretty good but sorry can't dyno cause have to go for tuning 1st. This is couse of the change of piping petern which is better but still need to be tuned. Anyone who wants to change ur intercooler the first thing to do is to make sure ur bumper fits in after installing the intercooler or u have to drive without a bumper :) Nice dealing with u guys.. I'm satisfied.. :) cheers..

 

[Garage-R]

Thank You so much KITH.....don't worry, once tuned, i will set up the dyno test at LINKS for you and don't worry they are very good in what they do........ JFA Sunway is our recommended piping fabricator and specialist and Links is our recommended workshop for Dyno test!!!......

Hey guys, check the intercoolers out....!!!.....and you'll be surprised on it's performance!!.....1 testimonial is up and still waiting for another!!!

Call me or my partner to view the intercoolers.....various sizes available to suit your car!!

Cheers!!! :)

 

[Garage-R]

Updated.... view large size Intercoolers at LINKS DYNO TUNE IN SUNWAY!!

 

[beelzebub]

saw the the 'cooler' at Links today..NICE..but no money to buy

 

[Garage-R]

HI!

Thanks Beel....well i have other sizes as well which are priced lower...... :)

Bump!......call to view!!!....will not dissapoint!

 

[Garage-R]

BUMP!!!......call to view!!.....

 

[Garage-R]

BUMP!!!....for those into serious performance and looks!!!...Call me!!!

 

[Garage-R]

Thank you very much Syah....very nice dealing with you....once you get it installed please inform me ok....... :)

Call me up to view the intercoolers.....!!!!

 

[Garage-R]

Bump!!!!.........

 

[kRiminaLz]

juz one question...
does it has the same agility as the real intercoolers made by the manufacturers,e.g mitsu & nissan?
coz long time ago i've used a custom intercooler looks juz like yours for $1100, but after i met in a 'not so serious accident', it ripped of my i/cooler...
totally pist off....
so, does yours haf the agility like the i/c made by the manufacturers?
if yes, i'll buy it in 2weeks..

 

[Garage-R]

juz one question...
does it has the same agility as the real intercoolers made by the manufacturers,e.g mitsu & nissan?
coz long time ago i've used a custom intercooler looks juz like yours for $1100, but after i met in a 'not so serious accident', it ripped of my i/cooler...
totally pist off....
so, does yours haf the agility like the i/c made by the manufacturers?
if yes, i'll buy it in 2weeks..

This is a very subjective question. I don't know how severe was your accident. In comparison with a mass produced i/c, I can confidently tell u that our i/c's are more robustly constructed with welded in end tanks vs. pressed joints of a mitsu/nissan's tube & fin i/c. I'd guess that ur custom intercooler was damaged at the core and hence it ripped apart by the impact as the layers are joined together by mean of brazing/adhesive. No doubt that a tube and fin i/c will not 'ripped apart' since the tubes are extruded with more ductile/softer metal but it won't be repairable and the efficiency of it will drastically reduced.. Would u still want to use it?? At least with a bar and plate type u can still salvage ur end tanks and repair the core.

Anyway, no heat exchanger cores are meant to withstand any direct impact, come view our i/c and make ur own judgement. Ur concern should be on the increased efficiency and minimal pressure drop our i/c can offer you! :D

 

[kRiminaLz]

thanx bro..

 

[Garage-R]

No probs at all.....anyway, just give me a buzz or anything if you would like to view them......

 

[Garage-R]

Come on guys!!!....Get your intercoolers here....for replacements or upgrades. Some sizes are sold out however will be bringin in more end of next month.....U can always place a booking with a small deposit as well.....call me for availability of sizes!!!......i'm sure there will be one which suits your car!!!........or call me to view what i have at this moment....Prices for next shipment will be based on currency fluctuations as well.......buy early or book now to avoid paying extra!!!...... :)

 

[tatatititututoto]

dude, currently my car is running a VR4-RS I/C but wanna change to either the 550x300 or the delta fin 600x300. btw what is the differance between the 550x300 and the delta fin?

how much is the installation cost?

 

[Garage-R]

dude, currently my car is running a VR4-RS I/C but wanna change to either the 550x300 or the delta fin 600x300. btw what is the differance between the 550x300 and the delta fin?

how much is the installation cost?

HI,

Thanks for your interest in the intercoolers. Currently, i only have the 600 x 300 x 76 Bar & Plate, 600 x 300 x 76 Delta Fin and 560 x 200 x 90 Bar & Plate left. The last unit of 550 x 300 x 76 was just sold off during the weekend and another one was sold to our forum member Kith with a Satria. I've posted his pics here as well.....
The difference would be the design of the cores. The Delta Fins uses the tubes and fins construction and also it looks abit like the Greddy ones as well.
If you prefer a Bar and Plate one, i would suggest that you go with the 600 x 300 x 76 Bar and PLate. This one will be slightly bigger than the 550 x 300 ones by 5cm in terms of the length of the core size.
Even the 560 x 200 x 90 Bar and PLate should have a larger core volume as compared to an Evo1,2 and 3 or the VR4 RS.
As for the price of installation, i will not be able to give u a quote. It really depends on how much work must be done to your pipings. However, it will be the same price if you were to install any other front mounts on your car. If you're already using stainless steel pipings, the fabricator may only need to modify the front portion of your pipings to suit the new intercooler therefore the price will be much lower than fabricating the entire set again. I would reccommend JFA in Sunway to do the fabrication of the pipings as i have seen them doin excellent job on my customer's car and the customer was very satisfied. However, it's still up to you to source for other piping fabricators to install it for you :)

Well, give me a call to view the intercoolers. Preferably around PJ area. I'm sure you will not be dissapointed. Thanks again for your interest.

 

[kith]

Bro next month i'm going to tune the car than we dyno k.. i also want to chech the horse power.. Hey evryone says it's nice..actually the brand doesn't matter but the most important is the airflow.. The size is just nice..Will keep intouch wif u ken.. thanks..Do u have any idea how much i can sell my previous intercooler evo3??
Chua not changing his intercooler ar??