PowerZONE'd cars!

[bem69]

I got a 1995 Wira 1.6 a/b auto. Is that still possible to be Powerzone-d? :D

If so, how much for the premium package?

 

[Powerzone]

Yes, even on an auto car what is basically happening is that the engine now has more power, so you can still experience the improvement. It's like putting in a larger engine.

We've the following upgrades that suit your Wira 1.6 auto:
1. Hi-performance road formula camshaft (RM1250 installed on exchange)
2. Tuned length extractor (RM450 installed)
3. Custom ported head (RM1800 installed exchange).

 

[Powerzone]

Originally posted by si|verfish@Mar 3 2005, 04:42
Thanks.

But, regarding the noise and fuel consumption, I was reffering to the mods without the ECU. How much different will it be from the standard car.

Should be almost the same, both noise and fuel economy.

 

[putera9394]

Originally posted by Powerzone@Mar 4 2005, 15:54
Yes, even on an auto car what is basically happening is that the engine now has more power, so you can still experience the improvement. It's like putting in a larger engine.

We've the following upgrades that suit your Wira 1.6 auto:
1. Hi-performance road formula camshaft (RM1250 installed on exchange)
2. Tuned length extractor (RM450 installed)
3. Custom ported head (RM1800 installed exchange).

The cams & header's price is acceptable but why is the ported head cost so high? Do you flow bench the head before & after the porting has been done? If not how I will know that your ported head is better than other workshop's ported head that cost RM800 the most? :o

 

[Powerzone]

Our ported heads go through the full processes as discussed in our website.
Every detail is done by the book (professional tuning books. Btw, we sell these too, the books--for DIY, better info/knowledge, become a smart purchaser).
You're welcome to come and see first what we have, you can't compare with others without looking at details.

 

[JoNkK]

The mods are:
1. Pair of hot cams
2. Extractor kit
3. Exhaust piping and silencers
4. Ported head
5. Engine blue-print and balancing
6. Fuel pressure regulator.

For Kancil 660 GX ?
How much would it be ?

 

[toriton]

Prices are:

1. PZ performance camshafts (pair) =RM1450
2. Porting=RM1500
3. Blueprinting and balancing=RM2,500 to RM3,500

rm1450+rm1500+rm2500=rm5450 .waaa..... a lot of money just to get 120 bhp/whp.

 

[xcheong]

bro, its 1250+450+1800+2500 = RM6000 larrrr
120bhp from a small engine is very power liao larrr....
u can't simply compare 4g13/4g15 to a 4g93/4g63 engine mahh...the weight also alot different.
besides its NA and not force-induction.

 

[mantys]

dear sifoo,

need to know bout one thing...what is the diff between kW and hp? how to diffrentiate is? let say that the car produced 76kW, then how to know the engine's power in hp? can i know the calculation to convert from kW to HP?? i really need to know. TQ

 

[V8_nutter]

We don't do crank lightening as this is NOT an accepted blue-printing procedure. Why?

The crank counter-weights are calculated by the design engineers (with sophisticated computer analysis) to produce an opposite and equal dynamic force to counter the centrifugal throw-out force of the pistons and con-rods so that the rotational components are fully balanced, both axially and radially.

Cutting off the counter weights will make the whole rotating components to be off balance and can cause premature bearing wear!

The balancing of the crankshaft including the front pulley, con-rods, and pistons altogether costs RM600 (parts taken out from engine).

Bro is there any other way to make the engine revs faster besides doing crank lightening ??

 

[thteh86]

bro, its 1250+450+1800+2500 = RM6000 larrrr
120bhp from a small engine is very power liao larrr....
u can't simply compare 4g13/4g15 to a 4g93/4g63 engine mahh...the weight also alot different.
besides its NA and not force-induction.

weight how much difference? 120hp very powerful? i assume the torque that is powerful

 

[tautakpe]

Max. Power Output (flywheel): 120.4 bhp (dynoed by Speedworks)
Max. Torque: 137.9 Nm
0-100 km/h: 9.5 seconds

Bro..why only get 120.4hp? just now,i read the Extreme megazine..about ur Iswara 4G15 can produce 142hp tuned by powerzone..the engines are same rite..so why there have difference?

 

[ntspower]

hi!
u high performance cam for kelisa EJ-DE ,can same use in perodua viva EJ-VE or not?