Tokico Abs

[gogogo]

hi,

just would like to know any ae 101 owner been using this tokico abs for his ride b4? how the result? can i using this tokico abs and combine with ori spring and head?

thanks n regards

 

[pi_zayo]

using kayaba shock at both front, using tokico shock at both rear, use back stock mounting & spring so far so good, has been around half year. ae111, 96/97. normally spring is lifetime.

 

[kennix]

Been using Tokico Japan for the front AE101 for 2 years and still running. Slight leak after changing aftermarket springs. Cheers.

 

[burnner]

use tokico

 

[swap aka SWAP]

asking..to all off u that using adj abs..what rate u guys used..& what rate r best used on malaysia street..& lastly..i`m looking for ori trd spring for trd adj..who have pls pm me..if can get front 7kg/mm rear 5kg/mm...

 

[gogogo]

then how bout the performance compare 2 ori kyb.

 

[wfhan]

tokico abs stiffer a bit than ori kayaba

 

[AE101-Wong]

ori tokico japan only is the best, local tokico same like apm, kyb, bla bla bla......

 

[gogogo]

ori tokico japan only is the best, local tokico same like apm, kyb, bla bla bla......

then how 2 difference it from japan or local? stiffer is't mean better??

 

[SachSeelan]

Tokico's come as standard on all Ford Lynx RS version... Great handling and quite comfy for a sport setting shocks... ori ones cost about rm260/piece...

good luck..

 

[wfhan]

ori tokico japan only is the best, local tokico same like apm, kyb, bla bla bla......

bro,
what absorber u using now ?

 

[gogogo]

Tokico's come as standard on all Ford Lynx RS version... Great handling and quite comfy for a sport setting shocks... ori ones cost about rm260/piece...

good luck..

abs colour is black and body and boxes come with wording "make in japan".. is this ori??

 

[SachSeelan]

it is ori...

 

[gogogo]

it is ori...

ok. thanks 4 the reply..

 

[AE101-Wong]

then how 2 difference it from japan or local? stiffer is't mean better??

the cone of the absorber cylinder will be more thicker than the local 1..
u can get this ezly in chopshop, but if buy new 1 perhaps need RM250 onwards..
and that's without top mount, spring, rubber protector..bla bla bla

 

[AE101-Wong]

bro,
what absorber u using now ?

i'm using local KYB only...

 

[gogogo]

the cone of the absorber cylinder will be more thicker than the local 1..
u can get this ezly in chopshop, but if buy new 1 perhaps need RM250 onwards..
and that's without top mount, spring, rubber protector..bla bla bla

i had changed, and it cost me pc 4 new. of course abs alone

 

[AE101-Wong]

i had changed, and it cost me pc 4 new. of course abs alone

less than 200?
perhaps it's local 1..:hmmmm:
coz japan 1 need 200++

 

[SEG86]

hanor hanor ..
self import balik ?:hmmmm:

 

[gogogo]

less than 200?
perhaps it's local 1..:hmmmm:
coz japan 1 need 200++

but the abs body n packing box c/w wording made in Japan..
the body parts no. n wording for the driver side front as:
B3090
TOKICO 61 14R
MADE IN JAPAN
can any sifu can confirm it's local or Japan?


forgot 2 take pic b4 install.. opps, even taken olso don't know how 2 upload..