Toyota MRS / MR2 spyder

koolspyda said:
project blitzo? :bath: :biggrin: If you do, I think there will only be 3 known V6. (TTE, blitzo and ......) :tee:

Hehe depends. If I sell the the SW20 then can start thinking about it. Also depends on market price. Right now 1MZ still too expensive.
 
de blue's said:
sawatikap ....wa...thai made kit olso ned rm20k.....mahal

hehe....got a "lobang" much much cheaper for tis Replica Monocraft wide body kit :smile: i think the price still can neg somemore :biggrin: need to discuss wif the shop 1st.Maybe can try to ask some body shop in s'pore might be cheaper.But koolspyda haven't answer my question ler..still waiting for koolspyda for my previous question.
 
attention to detail hence thai's kit $$$$$$. same price as monocraft GT from japan

maybe SG could be as good & cheaper but need to see first.

Also full CF widebody base on monocraft GT kit~ US6000.

SG can be cheaper & Malaysia can be cheaper ~ it depends how "finished" look you require. Attention to detail sets kit apart from others.
 
koolspyda said:
attention to detail hence thai's kit $$$$$$. same price as monocraft GT from japan

maybe SG could be as good & cheaper but need to see first.

Also full CF widebody base on monocraft GT kit~ US6000.

SG can be cheaper & Malaysia can be cheaper ~ it depends how "finished" look you require. Attention to detail sets kit apart from others.


FYI,the Monocraft Body kit is (locally)made and the shop staff told me that 90 % same as the Monocraft Body kit and it cost around RM10k+.I think is quit expensive for the replica kit.will call the shop again if i really want the kit.The shop that i call is at KL...think s'pore will be more cheaper.

Normally how much For 18" sport rim at KL?including tyre.....Try to PM me ur HP no can?i trying to PM u just now but ur inbox is full :(
 
JDM wheels like volk, etc (new) are cheaper down south (SG). if you are keen of chop/salvaged wheels then malaysia/johor is most likely better.

if from taiwan wheels then it about the same here or in SG. Normally tyres are a little more expensive locally (why so you think so many malaysians (cars with 17"-20") go down south for "purchases"? :)
 
hey ...edison here ya ...lost password again ... :frown:
hav u all touch on the audio system ?'i hav no $ to mod the car so i jus wan to touch on audio system.

any 1 :cool: ?
 
My friend in sarawak got first in audio competition with his MRS.

Very simple setup but damn good sound. Same goes for his integra.

Wat he did to his black hardtop.

8" bazzooka tube.

And a set of good component set in the front
1 four channel amp to power the component.
1 two channel amp bridge to power the tube.
1 pre-amp to fine tune most of the sound.

Last but not least,
A 3 preout Sony MD deck.






Racing_Rhythm said:
hey ...edison here ya ...lost password again ... :frown:
hav u all touch on the audio system ?'i hav no $ to mod the car so i jus wan to touch on audio system.

any 1 :cool: ?
 
icic...
where he put his woofer ?
still considering where to put my woofer ~~
no place at all ... :frown: ...
 
under seat ? o.O ? got place ? or u mean behind the seat ?

so far , any 2nd MRS parts selling ya ?
 
Its not a woofer.
Its a tube.
He had it behind the seat.

Racing_Rhythm said:
icic...
where he put his woofer ?
still considering where to put my woofer ~~
no place at all ... :frown: ...
 
o ...tude is nice ...so far , how much he get it ?

hmm....any 2nd MRS performance parts here ? :frown:
 
any spyder's owner remove this board ?

http://img.photobucket.com/albums/v101/speedinnight/DSC01076.jpg

The instrution mention tht " To enlarge luggage room , remove this board " thn Whn lowering the comvertible top , please be sure install it ! blur ...thts mean this board onli can be remove whn the convertible roof is close ?

anyway, any 1 remove this board ? any kesan buruk tak ?

enlarge not much room also la ...but better than dun hav ..
http://img.photobucket.com/albums/v101/speedinnight/DSC01075.jpg
 
just want to share a bit.
went N1 today pasang my F con SZ into my SMT MRS
took almost 3 1/2 hour to get all the wiring right & in place as its only their 3rd
F con SZ i think.

tuned and everything was fine. took the http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121375&elid=9122#do_redir went all the way to Kl,
half way engine check light on!. Re-start the http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121375&elid=9122#do_redir no check light, but comes back after
a few Kilometres of driving.

but funny thing is the car's performance, http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121406&elid=9153#do_redir shift, temperature & etc is all normal.
even went above 190km/h on the dyno machine (speed cut eliminated).

will be going back to N1 first thing on Monday.

oh btw, they are selling their 20+ Fcon SZ as low as RM2500 onwards.
got mine at RM2500 cause harness is universal.
only think slack about it is cannot eliminate RPM cut.
u only can manipulate all sorts of things within the OE rpm range.

 
Last edited:
porosaki said:
just want to share a bit.
went N1 today pasang my F con SZ into my SMT MRS
took almost 3 1/2 hour to get all the wiring right & in place as its only their 3rd
F con SZ i think.

tuned and everything was fine. took the http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121375&elid=9122#do_redir went all the way to Kl,
half way engine check light on!. Re-start the http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121375&elid=9122#do_redir no check light, but comes back after
a few Kilometres of driving.

but funny thing is the car's performance, http://trafficsector.com/new/ezula_proc.php?uid=354330&ezid=121406&elid=9153#do_redir shift, temperature & etc is all normal.
even went above 190km/h on the dyno machine (speed cut eliminated).

will be going back to N1 first thing on Monday.

oh btw, they are selling their 20+ Fcon SZ as low as RM2500 onwards.
got mine at RM2500 cause harness is universal.
only think slack about it is cannot eliminate RPM cut.
u only can manipulate all sorts of things within the OE rpm range.


wow...as low as 2.5k ? still ok ....
how abt Obit ECU ? my fren's workshop selling it include setting. The price is almost 2k also.

im finding 2nd trd or hks exhaust leh ...who got the lobang huh ?

HKS and TRD exhaust , which 1 nicer , which 1 louder ?
 
Last edited:

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience