Loud S-flow mufflers

[gohkokeng]

leave your car there........lol

heard of the topic "MY FRIEND's LEVIN DESTROYED BY WORKSHOP"?

 

[Raja_Mongkut]

Next u see.. "MY WORKSHOP BURNT DOWN BY ZTH MEMBER"

 

[tuckz]

Well if u trust the shop so much u can leave it there
But it will be best if u stayed n watch
Its not like u can actually watch coz the sparks are bad for ur eyes
But just u being there, trust me, they will really concentrate on ur car
And do a better job even if u dont know anything
They will be like thinking this person looking at me ler
Kenot curi tulang so better do nicely
Thats my opinion ler

 

[Muffins]

LOL ok. you guys got a point. Perhaps makan before going to workshop :p

 

[SkYwAlKeR]

Well if u trust the shop so much u can leave it there
But it will be best if u stayed n watch
Its not like u can actually watch coz the sparks are bad for ur eyes
But just u being there, trust me, they will really concentrate on ur car
And do a better job even if u dont know anything
They will be like thinking this person looking at me ler
Kenot curi tulang so better do nicely
Thats my opinion ler

yah yah... stay there good... besides, can chit chat with the boss mar, ask ask his opinion how to mod car... if he intro u this and that gadget, make sure u dont get excited wanna install also lar... later wallet bocor not my fault... hahaha....

 

[kent20]

Well if u trust the shop so much u can leave it there
But it will be best if u stayed n watch
Its not like u can actually watch coz the sparks are bad for ur eyes
But just u being there, trust me, they will really concentrate on ur car
And do a better job even if u dont know anything
They will be like thinking this person looking at me ler
Kenot curi tulang so better do nicely
Thats my opinion ler

haha,is too bad when stay face to a automotive graduated student,i see this kind of TIG/Plasma Gas Spark by true eye for few year a go,coz my factory everyday also saw the same thing,spark here and there to develop struct bar and all the exhust system,

we dont want see the spark,but we need to look at the red color line during the weld,the line from start pull untill as long as well,untill the place their gun cannot enter only they will start the 2nd line from top to bottom..and then they will recheck either got bochor or miss out point or not,if got they will touch up....

ok,now when your work finish,during your car hanging on the hight jerk,start your engine ask your friend use hand to push the pandel...put your left hand near by those welding point see got hot air leaking or not if got means bochor,ask them recheck agian.

because normal the exhustman's hand if different from us,because the always do the hard job,touching over heat stuff,untill their hand also not as sensative as us,is better we go and check it out ourself..why left hand because normaly we use right hand the most,so left hand is more sensetive to feel whatever got hot air leaking out or not...

theory/expirance class 1
evey one RM1 donation please hahahahahaha:_:

 

[nitrus]

Next u see.. "MY WORKSHOP BURNT DOWN BY ZTH MEMBER"

HAHAHA!! tat was reli funny...

if u guys wanna leave ur car at LAI EXHAUST SS2 its ok la, they're ok with ur car... but make sure u check everything after its installed la ...

n watever u wana ask Lai to recommend u, if he recmmends u anything other than K&N airfilter n mufflers/exhaust system, then u better get ready to spend ady if u wanna buy, lol !! coz he normally hikes up the price (as he also wanna earn from u ma if he get somethign to sell to u) ... so , pandai sikit la ya? :regular_smile:

 

[Raja_Mongkut]

kent gogo... said wanna call me... waiting for ur call la... haih...

 

[kent20]

arg..........no order yesterday today can sleep abit late...
hehehe

 

[gohkokeng]

haha,is too bad when stay face to a automotive graduated student,i see this kind of TIG/Plasma Gas Spark by true eye for few year a go,coz my factory everyday also saw the same thing,spark here and there to develop struct bar and all the exhust system,

we dont want see the spark,but we need to look at the red color line during the weld,the line from start pull untill as long as well,untill the place their gun cannot enter only they will start the 2nd line from top to bottom..and then they will recheck either got bochor or miss out point or not,if got they will touch up....

ok,now when your work finish,during your car hanging on the hight jerk,start your engine ask your friend use hand to push the pandel...put your left hand near by those welding point see got hot air leaking or not if got means bochor,ask them recheck agian.

because normal the exhustman's hand if different from us,because the always do the hard job,touching over heat stuff,untill their hand also not as sensative as us,is better we go and check it out ourself..why left hand because normaly we use right hand the most,so left hand is more sensetive to feel whatever got hot air leaking out or not...

theory/expirance class 1
evey one RM1 donation please hahahahahaha:_:

how about if those people is LEFT-HANDED

haha use leg to test?

 

[kent20]

how about if those people is LEFT-HANDED

haha use leg to test?

comment cens left-handed use right hand to feel

 

[gohkokeng]

lol some left handed....they use right hand also ma......

haha 2 hands also equal using......then must leg leg to test liao lol

 

[kangyoon20]

yo guys sry for interupt,
but wanna ask something here coz i'm noobie noobie to mod car la.
i think of changing my iswara aeroback 99' muffler,
my purpose are (most important first)
1, better FC
2, look prettier than stock one
3, no lost of power
4, little little low low sound

is it just get those cheap cheap muffler tip where just plug into the stock one is the best solution?

 

[SkYwAlKeR]

yo guys sry for interupt,
but wanna ask something here coz i'm noobie noobie to mod car la.
i think of changing my iswara aeroback 99' muffler,
my purpose are (most important first)
1, better FC
2, look prettier than stock one
3, no lost of power
4, little little low low sound

is it just get those cheap cheap muffler tip where just plug into the stock one is the best solution?

cheap cheap muffler tip wont give u option 1 and 2 ler... plus, it wont look good as well...
if u are not looking for noisy muffer, get those S-flow muffler... if got money, get branded ones.... can search for branded cheap 2nd hand muffler from halfcut shops.... if u want brand new, cap ayam also will do... ask the tauke if can try the sound of the muffler before purchasing lor....
dont get too big tip lar... 2inch will be fine...

 

[kangyoon20]

normally how much is a muffler cost?
not going branded, wif low budget
and...recommended halfcut shop and exhaust system shop in melaka?

 

[SkYwAlKeR]

cheap cheap cap ayam ones will cost about rm150-rm250...
better ones cost about rm300-rm400....
used branded ones (made in japan) found in halfcut shop cost about rm400...

in malacca, exhaust shop i recommend is CK exhaust lar.... at least they cater some good quality muffler.... prices will be a lil more expensive....

 

[kangyoon20]

CK...no idea where is it
only heard ppl recommend "marco" in malim...this one i know..haha

and...if get a cap ayam will hv any disadvantage?

 

[Raja_Mongkut]

ayam one.... after a while when the fiber finish burning.. ur eksos will start sounding like ayam oso..

get a Jasma one.. or at least a good quality local one la...

 

[SkYwAlKeR]

yah yah... get those with JASMA approved ones.... try find in chopshops lor... might bump into nice imported mufflers.....

CK exhaust is jz opposite cosplus in malim (across the main road)....

 

[kangyoon20]

oh...CK is there, never notice although always pass thru there.
so...at least 200-300 for a decent one?

and sky u know any chopshop in melaka ar?
after final we yamcha la hahaha....