Re Club [rotary Engine Cars]

[Gh0sT]

any fc owners can tell me where to get the brake disc ar...ori or aftermarket 1, for the 4 pot rx7 fc 1

 

[phat7]

Well its been sometime now and i would just like to keep the fire burning for all rotary fans. Couple of pics for rotary lovers.


At the same time we'll be doing some work tonite on a rotary. Perhaps a small meetup tomorrow?

 

[eovaz]

Dear All RE Addicts..
i'm Eric from Team Vaz-Maz Rotary Performance, Johor Bahru.
Vaz-Maz is a well known name of its RE modifications and servicing.
Mr. Edmund William, who is the founder of Vaz-Maz has more than 30Years of experience and knowledge of RE. So, if u guys out there got any questions or problems regarding your RE, feel free to email me at [email protected]. I'll forward all the questions to Mr. Edmund and will reply all your questions A.S.A.P..
Thank You..

Regards;
E.O.Vaz
email : [email protected]
url : www.vazmaz.com

VAZ-MAZ ROTARY PERFORMANCE
The Best Microtech Tuner In Malaysia

 

[boonyloh]

Well its been sometime now and i would just like to keep the fire burning for all rotary fans. Couple of pics for rotary lovers.


At the same time we'll be doing some work tonite on a rotary. Perhaps a small meetup tomorrow?

isn't that KC's Fd?

 

[eovaz]

Here's a couple of pics for u guys RE Addicts to share.. Hope u guys enjoy. :P

http://www.vazmaz.com/gal.pg205.pic2.htm
http://www.vazmaz.com/gal.pg205.pic38.htm
http://www.vazmaz.com/gal.pg205.pic40.htm
http://www.vazmaz.com/gal-sic105-pic4.htm
http://www.vazmaz.com/gal.sic205.pic4.htm
http://www.vazmaz.com/gal.sic205.pic5.htm
http://www.vazmaz.com/gal.sic205.pic8.htm
http://www.vazmaz.com/gal.sic205.pic21.htm
http://www.vazmaz.com/gal.sic205.pic36.htm
http://www.vazmaz.com/gal.sic205.pic34.htm
http://www.vazmaz.com/gal.sic205.pic19.htm

 

[13btt]

Who builds your rotary engines...Edmund himself or does he outsource??

Thanks.

Dear All RE Addicts..
i'm Eric from Team Vaz-Maz Rotary Performance, Johor Bahru.
Vaz-Maz is a well known name of its RE modifications and servicing.
Mr. Edmund William, who is the founder of Vaz-Maz has more than 30Years of experience and knowledge of RE. So, if u guys out there got any questions or problems regarding your RE, feel free to email me at [email protected]. I'll forward all the questions to Mr. Edmund and will reply all your questions A.S.A.P..
Thank You..

Regards;
E.O.Vaz
email : [email protected]
url : www.vazmaz.com

VAZ-MAZ ROTARY PERFORMANCE
The Best Microtech Tuner In Malaysia

 

[eovaz]

bro,
those engines are 100% built, prepared and tuned by Mr. Edmund himself. :)
For your info, most of his RE which he uses for race is Peripheral Ported.

 

[13btt]

Very good. However, peripheral ports are good for race but drive like crap on the street.

Your boss should open up a branch in KL assuming he has other mechanics also competent in RE rebuilds. IMO there is a lack of high performance RE workshopswithin the Klang Valley with most owners using questionable engines or swapped in oem half-cuts.

 

[phat7]

isn't that KC's Fd?

;) With owners permission of course.

 

[13btt]

I would like to plan for a meet & day trip up to Fraser's Hill this June (actual date TBC). We will leave early in the morning have lunch at say the smokehouse and then come back early to late afternoon.

Put down your name if you would like to join us. Non-rotary powered cars are welcome to join assuming you can keep up with the pace of RE!

Cheers.

 

[13btt]

I would like to plan for a meet & day trip up to Fraser's Hill this June (actual date TBC). We will leave early in the morning have lunch at say the smokehouse and then come back early to late afternoon.

Put down your name if you would like to join us. Non-rotary powered cars are welcome to join assuming you can keep up with the pace of RE!

Cheers.

Noone is interested??

 

[phat7]

Count me in dude.

 

[13btt]

FRASER'S HILL SUNDAY DRIVE & BRUNCH (LUNCH?) FOR RE CLUB

Update: The event has the official go-ahead as minimum numbers have been met. The day will be as follows:

Date: Sunday 10th July @ 8.30am

Meetup: Projet station on Middle Ring Road (just before the Karak Hwy turnoff)

Once all that are attending have gathered at Projet the group will leave to Fraser's Hill via the Karak Highway. Once we arrive we shall have brunch cum lunch at Ye Old Smokehouse.

I will provide a map to all in attendance at the meetup so as to hopefully minimise people getting lost (i.e. those who are not familiar with this route and/or who can't keep up).

For more info please email me [email protected] / 012 314 6755 Glen

PS. Please ensure that your ride is reliable with recent maintenance / service to minimise the chance of failure. I will bring along some basic tools & supplies in case any run into minor probs that can be rectified at the roadside.

Those that have confirmed their attendance are: Glen, Dave, KC, Mani, Gan, Vincent, Joe Kong... list your name down if you can make it along.

 

[desp_69]

wana know

hi i would like to join u guys...my name is TJ...i dont drive a rx car but i have implanted a 13b t engine into my 323 is that ok??

 

[phat7]

hi TJ. Sure dude, welcome to the club. Interesting to see the setup on your car and why you choose the rotary route?

 

[alex_77]

need rotory fren to help me!!!who can help me??? how much to rebuit a RE engine?? who can rebuit??because i have one fd,but now is lost comprese with 1 of the rotor!!! 1 to plan to rebuit my engine.

 

[phat7]

where is your location? Its a very good idea to have your engine rebuilt with new parts. call 012 3146755 and say dave referred you. Good luck.

 

[13btt]

hi i would like to join u guys...my name is TJ...i dont drive a rx car but i have implanted a 13b t engine into my 323 is that ok??

You are more than welcome as this RE Club (as the name suggests) is for rotary powered cars and/or other vehicles. Please sms your name & contact details to me at 012-314-6755 Thanks.

 

[13btt]

need rotory fren to help me!!!who can help me??? how much to rebuit a RE engine?? who can rebuit??because i have one fd,but now is lost comprese with 1 of the rotor!!! 1 to plan to rebuit my engine.

I have sent you a pm.

 

[yOkOmO]

Hello RE club members...

I'm looking for some items for my RX-7. My driver's side power window switch has a problem, it can only go down but cannot go up. Tested with battery the motor is ok can go up and down, so its only the switch is broken. So anybody know where i can get this thing fix or get a replacement for the switch only.

Also where can i get RX-7 emblems? The previous owner of the car have shaved of all the emblems from the car body, so i'm looking for new ones. Any shop or chop shop selling them. Appreciate anyone who could help me on this matter. Thanx.

Pls PM me.