Anyone Know How To Modified 4g13??

[visitgoodfinder]

hi all bros here. I new here. Heard ur talking about 4G13 Japan. I know the current Mit Colt is using 1.3 Mivec Turbo engine. I wonder whether this engine can be found locally? If instal in my Iswara chasis would it be a problem ah?

 

[SkYwAlKeR]

hi all bros here. I new here. Heard ur talking about 4G13 Japan. I know the current Mit Colt is using 1.3 Mivec Turbo engine. I wonder whether this engine can be found locally? If instal in my Iswara chasis would it be a problem ah?

i dont think u can get it here lar.... plus, it is a new engine from mitsu.... they wont send such new halfcuts out.....

even if u managed to get it, i dont think the mounting will be the same.... coz iswara using 80s technology chassis.... this new mivec turbo is designed to fixed on new mitsu models....

correct me if wrong...

 

[rayracer]

hey!! what 1.6 gear box to used in my 4g13??

 

[tykoh]

i sand my carb, cheap solution, pickup a-ok!! good i would say, the rpm rev like no body business.....hehehe

edit; turbo10, mine i change to japan 4g13 after unknown problem of the dispearing act of my engine oil......difference is there, smoother, cost me 1k

wat do you mean by sand the carb? i dont understand.... can you tell me more?

 

[rayracer]

my forum change to people talking already,why no people answer my question already?? why my sifu?

 

[SkYwAlKeR]

my forum change to people talking already,why no people answer my question already?? why my sifu?

what was ur question again??...

 

[rayracer]

using what car 1.6 gear box fit my ride? can modify final gear?

 

[SkYwAlKeR]

sorry ler bro, i also not sure.... i still noobie in transmission thing... wanna mod my clutch kit but dunno how also... hahaha.... in the process....

 

[rayracer]

？？？？？is ok!thanks! what degree and good performance camshalf for 4g13??

 

[SkYwAlKeR]

?????is ok!thanks! what degree and good performance camshalf for 4g13??

erm.... i heard powerzone camshaft is good for street driving....

 

[rayracer]

need adjustable cam pulley? if add in also more better right?

 

[SkYwAlKeR]

adjustable cam pulley works better in twincam.... single cam like ours, only give minor improvement la... if u not using high cam, no point putting in adjustable campulley....

 

[Blitz20_86]

im using a 268 degree camshaft with arospeed adjustable cam pulley..

 

[rayracer]

im using a 268 degree camshaft with arospeed adjustable cam pulley..

really? then what the result? good performance? what the brand of the camshalf?

 

[xbalance2002]

how much is 1.5 proton flywheel cost...new or 2nd hand?

 

[Blitz20_86]

rayracer: not bad.. increase some hp.. if im not mistaken, the brand is RPW.

 

[jeremy]

i sand my carb, cheap solution, pickup a-ok!! good i would say, the rpm rev like no body business.....hehehe

edit; turbo10, mine i change to japan 4g13 after unknown problem of the dispearing act of my engine oil......difference is there, smoother, cost me 1k

again,wat is sand my carb???

 

[nitrus]

u take out ur airfilter, on engine ... pour those white sand into the carb, remember to rev it ... keep revving ..... it'll sand your carb very well....

just remember to do this near a mech's shop k? u wun regret it...

 

[tykoh]

u take out ur airfilter, on engine ... pour those white sand into the carb, remember to rev it ... keep revving ..... it'll sand your carb very well....

just remember to do this near a mech's shop k? u wun regret it...

now i got wat you mean lah... crazy ppl... hahaha... after tat can change to webber lah like tat...

 

[nitrus]

now i got wat you mean lah... crazy ppl... hahaha... after tat can change to webber lah like tat...

YEAA weih ... never thought of that also ... very good reason to change to weber after that!!!!