Exhaust mod on perdana v6

[DanzEterna]

ur car is a street racer, that why have to have shift light.
only racer layak to have shift light..

mana ada bro..my car is a family car to bring family jln2.....only...

 

[myperdana]

ahhaha .. mean mean neuroone bro :p

 

[NeuroOne]

hehe.
jokes aside, its good to have shift light for manual cars.
at least if u blast ur music very loud, u can be reminded to shift up even if u cant hear ur engine revving..

 

[hex999]

I want shift lights as well :D how much it cost to install it and where ?
was bored today so i took a video of my exhaust sound since that is the main purpose of this thread
Perdana v6 modded exhaust sound - YouTube

 

[myperdana]

woots ! thats fierce ..

 

[NeuroOne]

the sound kinda berdengung.
perhaps u should take the video from the side, not from behind.
one more take....

 

[hex999]

[/COLOR]

the sound kinda berdengung.
perhaps u should take the video from the side, not from behind.
one more take....

My roar not chun like yours la bro :D Im using non branded aftermarket parts only(dont even know the name of my muffler, just follow measurement and bantai)
will be taking one from the side soon.
ohh and bro i pm'ed you, asking for advice


I wished my car would sound like this, man the mivec v6 sound can make a girl orgasm.

ä¸‰è± FTO GPX MIVEC MANUAL 6A12 HKS Super Power Flow - YouTube

 

[NeuroOne]

[/COLOR]

My roar not chun like yours la bro :D Im using non branded aftermarket parts only(dont even know the name of my muffler, just follow measurement and bantai)
will be taking one from the side soon.
ohh and bro i pm'ed you, asking for advice


I wished my car would sound like this, man the mivec v6 sound can make a girl orgasm.

ä¸‰è± FTO GPX MIVEC MANUAL 6A12 HKS Super Power Flow - YouTube

just find Blitz Nur Spec muffler and ur V6 sound will be very nice..
my setup in the Youtube video is long time ago, now no more sound like that..

the mivec V6 sound cannot get la. u can just get the V6 sound without the mivec scream..

 

[hex999]

I wanna ask you guys with good ears to hear my engine's health, at low RPM(3000), could hear the tappet sound clearly, is this normal? I recently changed to fully synthetic oil and the sound became clearer, what is the best and cheapest solution to get it fixed?I don't plan on changing all the valves.

---------- Post added at 12:44 PM ---------- 6 hour anti-bump limit - Previous post was at 12:44 PM ----------

I wanna ask you guys with good ears to hear my engine's health, at low RPM(3000), could hear the tappet sound clearly, is this normal? I recently changed to fully synthetic oil and the sound became clearer, what is the best and cheapest solution to get it fixed?I don't plan on changing all the valves.

Perdana V6 engine sound - YouTube

sorry for bad quality, used my friend's phone :D

 

[DanzEterna]

use semi syn bro, fully syn too thin.

 

[NeuroOne]

yep.
the cheapest solution, use semi-syn or mineral oil.
the more expensive solution is changing the tappet to newer generation..

 

[hex999]

How much would that roughly cost bro, and would it increase performance?

 

[DanzEterna]

but if change tappets, in the future it will still make noise rite?
u could adjust the gapping on the tappets too.

 

[myperdana]

i heard one of ma friend said ... if u drive agressively, the next day morning u can hear the tappet sound louder and clearer ..

and if u maintain a normal driving on the next day .. will notice the the tappet sound will become lesser on the next day start ..

he was saying something auto adjustment which i really dont understand.. anyone knows about this?

 

[NeuroOne]

long ago, i found a link of a next gen hydraulic tappets for sale in aussie forum. cant remember where..
but its expensive la.

 

[hex999]

Wanna ask a question about adjusting pv6 valve clearance, one of my friend said it does increase a slight performance and it should be adjusted after high mileage. How much would it roughly cost to adjust it and does it really give any benefit?

 

[hex999]

However my mech stated that our pv6 tappets/valve no need to adjust, its already auto-tune.. is this true?

 

[myperdana]

thats what a formen said to me also ..

 

[moll]

ur extractor is standard rite? no need to change if u dont have the money.
just leave it like that. if u have money, get those Hotbits extractor.
found a fella selling v6 extractor just like Hotbits in ZTH..
if u want to custom also can..
but just do this first : after the flexi pipe (nenas), use 2.3" (inner diameter) pipe sampai muffler. muffler also put 2.3" inlet.

v6 NA engine max torque is at 4500rpm. that's why u feel after 4000rpm its pulling the best..

i've also measured the stock piping. cant remember exactly but i think its around 1.8-1.9" inner diameter.
we use only the inner diameter. outer diameter can be big depending on the thickness of the metal..

sorry for interruptin

2.3 piping,can use this sett for auto bro? :)

 

[hex999]

sorry for interruptin

2.3 piping,can use this sett for auto bro? :)

well it would shorten your auto gearbox life, but if you don't mind you could but use a 2.3 inch S flow mufler instead of the straightflow